Nodogsplash openwrtPekerjaan

I need some one who can install openwrt in mi 4a router if any one have talent please quote the price

Hello, We work with an OpenWRT Access point where the manufacturer has customized the sysupgrade process (with his own code). We need to understand how works the new process so we can slightly modify the code. What is needed is therefore to do reverse engineering so we can do a few changes. We will provide access to a computer which will be connected to the access point so you can try your code directly An OpenWRT specialist is needed. More details on what we exactly need to do will be provided Thanks

Hello We need to create a site to site IPSec connection between 2 locations location A : Sophos XG firewall Location B : OpenWrt on a raspberry Pi 3 - connected to the internet by wlan Needed tasks: 1. inform us about any changes to be made to the default IPSec policy in Sophos and guide us while creating the IPSec connection on Sophos. 2. Configure OpenWrt to connect to Location A. Thanks

looking for support in design a small 4G router that supports OPENWrt and a 4G RF module through a PCI interface.

Hi, firt of all we must understand if it is possible to install Home Assistant into a small OpenWrt router. If it is possible 1) i will buy Xiaomi Mi Router 4C N300 64MB 2) install together OpenWrt releases 21.02.1 on Xiaomi Router 3) install together Home Assistant 4) install together a plug-in to manage our electronic boards 5) test if everything works Thanks

I have two devices from Savari company (namely, roadside unit RSU and on-board unit OBU). These devices are similar to routers and their firmware is based on openWRT. Both devices have wireless network interface cards (NIC) that run a variant of WiFi called dedicated short range communication (DSRC). Additionally, both devices have ethernet NICs to directly connect to them. I would like someone to help me make theses devices relay packets received from the ethernet port through the wireless DSRC port. My topology is: laptop 1--> router 1 --> router 2 --> laptop 2. The laptop would send a packet to router 1 through ethernet. Router 1 forwards the message to router 2 using wireless DSRC. Router 2 relays the just received message to the final destination laptop 2 via etherne...

Hello, I need someone very familiar with the OpenWRT to build a custom router. Please bid only if you have experiance as it is a complicate job and don't have much time. Thank you

We're looking for a developer who is familiar with the Allwinner SDK (OpenWRT) for several fixes we need to implement (V536) - OTA script via recovery partition - WebRTC video streaming Thanks,

Hello freelancers, I am looking for an Flutter expert who can help me optimizing the code and UI of my new flutter app. I am a flutter beginner and started with a new personal app to monitor sensor data of my caravan from scratch. The app is working currently on a single page but should be extend...Flutter Expert with deep and up-to-date knowledge about BLoC (eg. ); - Development must be done directly in my bitbucket git repository; If you have the following skills, this will increase the chance to get the contract: - Knowledge with mosquitto MQTT broker and general knowledge about the concept of MQTT; - Skills in python development; - Knowledge in openwrt firmware development; This is not to be seen as a one-time job. Best regards, Juergen Weiss

We need to install the following python v3.9 packages on a device running a TIP OpenWifi firmware v2.2 (): - nfstream v6.3.3 - lightgbm v3.2.1 The toolchain for that firmware uses GCC v5. The device we're trying to get these working on is this:

It is about getting a build for all OpenWrt compatible devices by integrating a custom CoovaChilli version. Coovachilli modification is already done. It would just be the build for all supported devices on the OpenWrt page.

...that is under OpenWRT control. In order to work a client application (written by our company) needs to open an UDP socket secured by DTLS protocol to the server application (provided by a third party company). Problem description: After migration of server application to its newest version we have encountered a problem with establishing connection between them. Server actively refuses connection on DTLS handshake stage. We have discovered that when we run server application on a separate board (BeagleBoneBlack with Ubuntu onboard) and make our client app to connect to it remotely the problem does not occur. Expectations: We need an expert to analyze and solve the problem so we will be able to run both client and server applications back on the same Mediatek board under Ope...

Hi, I've read this and I want to do the same. https://www.freelancer.com/projects/linux/Install-proxy-Openwrt-31473356/proposals Would you please do it? Thanks

Thanks for reading, we have a problem to solve as below: 1. We are running Asterisk IP PBX soiftware on MT7628 Cpu running OpenWRT 2. For audio we are using PulseAudio and we have some problems: 2a - The echo cancel algorithm for the on-board speakerphone gives echo to the distant end, i.e. the echo cancel is not fantastic and needs looking at 2b - We are struggling to play recorded audio over our speaker 2c - The PulseAudio always requires a second reboot to work properly. If you are an engineer with solid experience in this area we would appreciate assistance on solving these items.

I am looking for an expert who can collaborate as openWRT backend developer with my original frontend developer. I am willing to provide up coming jobs continuously if you successfully deliver this first job.

Hi, Wants to install Shadowsocks on our alibaba cloud server and configure it to our local router which has openwrt and Shadowsocks installed. We want certain local IP address internet traffic to go through the Shadowsocks

Hi, Wants to install Shadowsocks on our alibaba clould server on port 443 and configure it to our local router which has openwrt and Shadowsocks installed. We want certian local IP address internet trafic to go through the Shadowsocks

I would like to install the 3proxy application on my ESXI with the OpenWRT system. The freelancer must write a short instruction on how to do it next time.

...router and to the VM to bond at the datacenter. The purpose of that bonding is to have a faster and reliable layer 2 connection between 2 sides. For bonding to work correctly there is a VM available at the datacenter. See the links below for the type of bonding we need: (there are images for other hardware but not for Mikrotik) In order for the candidate to receive the payment for this task we should

Aliyun DDNS module in OPENWRT old IP record is not deleted automatically while a new resolution record is added I have to manually delete old ip records in the ddns service provider console

Hello, I have openwrt firware that was customized my for hotspot. Firmware is fine fully working for over 2 years. I need now 2 adjustments: - increase up/download speed which is statically set to 1/3 megabytes (I know this is just update the values at a file but I dont know how to generate new image after it), although I have the full "generate image" enviroment fully set. - when my routers are turned on, they do a http to downoad a few configurations (network name, channel, very basic stuff). I want to add a condition in which after 5 minutes it is turned on, if one of the parameters it downloads is set to "off" it will turn of the wifi interface . I need this for routers in which I dont use the wifi, just the LAN ports.

Hi, Need help with getting the below python v3.9 packages working on openwrt v19.07 (and guidance on how we can do it ourselves for future packages): nfstream v6.3.3 lightgbm v3.2.1 The device we're trying to get these working on is this: Appreciate your help, thank you.

Hi, Need help with getting the below python v3.9 packages working on openwrt v19.07 (and guidance on how we can do it ourselves for future packages): nfstream v6.3.3 lightgbm v3.2.1 The device we're trying to get these working on is this: Appreciate your help, thank you.

Hi Rumon C., I noticed your profile and would like to offer you my project. I need a simple proof of concept captive portal page for Mikrotik or OpenWRT that sends and receives information from MQTT topics (with javascript client or similar solution: ). Please let me know if you have available time to discuss further details of the project. Thanks.

We are looking for someone to be able to compile this code: (based on openwrt) and deploy it on our access point (remote access can be provided if necessary). In addition to the above, the access point physically comes with a NOR flash and a NAND flash installed. The NOR flash is what we are working with right now but the NAND flash is not configured/formatted on the OS level so it is not visible to us. We need that NAND flash to appear on the OS level and be available to us as storage. Thank you.

The NAS is mounted to my router as far as I can tell and my fstab file is configured with the correct UUID numbers but my NAS isn't accessible in my file browser every time I reboot. I had this same setup working before with a different OpenWRT router but I'm not having much luck with my current router. I use AnyDesk or TeamViewer for remote assistance.

We are looking for someone to be able to compile this code: (based on openwrt) and deploy it on the Edgecore EAP101 access point. In addition to the above, that person should also be able to mount the NAND flash (that comes with the access point). Thank you.

I need build openwrt from source.

- View, edit VPN Ipsec site to site parameter - View ipsec status

First - do not message me, just Bid I will delete any bids from anyone who sends a private message!! We have a project using MT7688/7628 and require someone who has LCD and LVGL (Light and Versatile Graphics Library) experience to implement some screens for us using a simple API. The full set of screens so far is shown here but we initially only need a small selection. Please let me know your experience in this matter, there will first be a small test project and then based on success we will implement a larger longer term project. Thank you

I have Xiaomi router done all openwrt configuration, just need to configure to receive wifi as Internet no need WAN port

Hello, Im looking for OpenWRT UI developer. Project description: LuCI customization. Skills reguired: lua, javascript, html, ubus.

We need to develop an MVP as follows: - A cloud based dashboard to remote control and manage simple task on WiFi Router as: Status, LAN speed, number of clients connected to WiFi and speed, see and edit WiFi SSID, Password, turn on off, reboot, etc. - A openWRT package/agent able to send and receive info to the management cloud. More info available

Silakan Daftar atau Login tuntuk melihat rincian.

We have a hardware from M5Stack namely core 2 , fire and atom () based out of esp32 chips .This can run micro python , arduino sketch and C. We have a code based on ANSI-C which is successfully compiled and running in X-86 Linux/Windows and ARM RaspberryPi and openwrt. We need to port the same as mentioned here ( changing headers ) cross-compiling to esp32 The objective is to compile and debug the code also provide documentation on how it is done. Details shall be provided through DMs

I need a VPN Manager for Openwrt based Routers. something like this: [login to view URL] Someone can Done that for me?

I need a VPN Manager for Openwrt based Routers. something like this: Someone can Done that for me?

I'm really not sure where those 4.5 stars come on. They must be fake. It's just incredible. They tell me to contact support I do. I contact support they tell me to log in after my account is closed. I log in and they say chat with us. I chat with them, they say send an email tu support. This is the WORST CUSTOMER EXPERIENCE i have ever experience. I even asked if they had broker rebate when putting money or taking money from the market. The lady said "I don't know". They also keep insisting non-stop for you to use their SUPER SLOW managed route. It's incredible. I tried their simulator: it only fills when you buy on the ask and sell on the bid. Horrible!! I asked why my leverage dropped from 6 to 4 everyday. No once could explain. I called technical supp...

We have a hardware from M5Stack namely core 2 , fire and atom () based out of esp32 chips .This can run micro python , arduino sketch and C. We have a code based on ANSI-C which is successfully compiled and running in X-86 Linux/Windows and ARM RaspberryPi and openwrt. We need to port the same as mentioned here ( changing headers ) cross-compiling to esp32 The objective is to compile and debug the code also provide documentation on how it is done. Details shall be provided through DMs

Buenas, Necesito alguien que configure rsyslog en openwrt para enviar los los a

I am looking for a person experienced in openwrt, open sync, c and networking skills for my project. This will be a ongoing project and will run for minimum of 6 months This person needs to be remotely coding in my laptop which I will provide access through Webex or other tools and I can help with flashing the router with firmware and help with testing changes etc modify existing code. As of now it is in bug fixing and feature development phase so bugs get assigned to me and that person need to help me fix them

We have a requirement which requires a live streaming solution. Here is the requirement: There will be 5000 IoT devices (using Omega 2S+, running OpenWrt). Each device is capable of streaming live video via a specific usb camera (which is only H264 compatible, 720 degree panoramic camera). There will be about 1000 users. Each user can own 1 or multiple devices. Whenever the user wants to view live streaming of a device they own they should be able to do so. So if user1 owns device1 only user1 should be able to view the live streaming from this device and no one else. The user credentials and device mappings are stored in a database. The device is connected to the server using MQTT protocol and the users connect to the server using both MQTT and HTTPS REST API. The user will see the...

i want to make cloud radius auth system with openwrt and wifidog

Need yocto build of Linux openwrt layer for nxp mini evaluation board.

Necessary skills: Linux, OpenWRT, Strongswan (IPsec IKEv2), Iptables I want to configure an interface for IPsec IKEv2 on OpenWRT router (Asus RT-AC56U) which receives RX packets and sends TX packets. With the interface I want to configure a KillSwitch. By the KillSwitch, I mean a firewall rule that only allows VPN traffic through. (Attached is an example image of a configured KillSwitch). The configuration should run with the VPN provider www.perfect-privacy.com. In the attachment is again the configuration with a better formatting. This link could also help: With this iptables rule, the RX packets reach OpenWRT (in /etc/): iptables -t nat -A postrouting_wan_rule -s "${PRIVATE_SUBNET}" -m policy --dir out --pol none -j SNAT --to-source

Hi Hernan, I noticed your profile and would like to know if you are comfortable or interested in working with quectel BG96 on openWRT

Hi Andrei V., I noticed your profile and would like to offer you my project. I want a basic branding 1 page UI for OpenWRT. Display current connected wireless devices and USB device connection status. The only functionality of the router will be to act as a DHCP server for wireless devices and provide network access to the USB port. No custom routing, firewalls, qos, or even manual ip address change. The target market is general consumers, as young as teenagers, children.

this project is based on a openwrt update system with web ui we developed internally 10+ years ago, Right now both the client running on openwrt and the server running on linux functionally run, though we have gotten to the point where the software update mechanism needs to be looked at and additional features added to the heartbeat / management side. we will want ac_client to run on boot, simple modification to openwrt package makefile to include the config file and certificates in the image and start the client side. and the software update mechanism needs to be evaluated - we believe its functional and the AP gets the firware after being authorized but fails to apply it. most likely sysupgrade syntax further to that update the get its mac address, gather its runn...

I have a captive portal for WiFi at my Hotel it has two options, buy by the Hour or 24 hour pass accepts CC's just fine, I want to add in the Stripe code for Apple Pay as well as Google Pay, there is literally a step byt step guide I just do not have the time. http://ironwifi,com Iron WiFi is using CoovaChiilli under OpenWRT on a GLinet GL- AR150

Title essentially says it all. I also want to configure Adblock and configure the OpenVPN app on my Android device. I tried exporting client config files from OpenWRT and importing them to the OpenVPN app but couldn't make it work. Here are some resources: If someone could remote access my PC and show me what to do, that would be great. FYI, I live in PST time. Let me know when would be a good time for you. Practically anytime from 9AM to 12PM should work for me I think.