Arduino Jobs

Necesito integrar en una tarjeta Raspberry un módulo SIM GSM, esto para poder otorgar salida a internet autónoma

Se debe implementar un programa que por medio de un dashboard arroje información referente a distintos puntos monitoreados desde una central de incendio. Información enviada desde Arduino hacia servidor ( Lenguaje C, C++)

Humidity temperature timer controller program

We have converted the A series PLC with NSD encoder & its converter VS-1S62 to Q series PLC with same encoder and its converter VS-Q62B-M2PG. There is a difference in the parameter settings. The new Q series converter is not supporting some parameter settings as A series converter. And also we don't have comments on the existing PLC program. If anybody can help on this, Please message me.

My project is for an ESP32 data logger and data history display. I need to log serial data from a sensor, which will be displayed in the form of a chart on a html data will then be stored in an SD card for future reference. I am looking for a freelancer with expertise in this project. I have a working sample. The esp32 is on APmode, uses a sd card to store the requested data from a sensor. The ESP32 host a webpage that users can log in and see the data stored, data is pulled from the SD card via http request on a file called data.txt. My problem is as follows: The chart only displays 20-40 data points stored. But if there is more, like weeks or month worth of data points it freezes or re-starts. I figured it has to do with the amount of time the http request takes due to the large amou...

A PIC18F25k22 development board and HD44780 LCD board along with your ICD4, The embedded system has an analogue input connected to AN4, an 8-way DIP switch connected via the SPI bus and an LCD connected in 8-bit mode to POTR B of the microcontroller. The lcd should initially show a two-line message – ‘Welcome to’ on the top line and ‘Embedded Systems’ on the second line. After a short delay this should change to displaying the adc value on the top line and the DIP switch value on the second line with suitable user interface information telling the user what the display is showing.

I need an Arduino code the test the full write and full read operations for the 24LC512 memory using the Arduino Nano Board.

this project includes UART touch screen in which touch screen will communicate to micro via UART port . Input instructions from touch screen & output through Micro GPIO. Touch will control GPIO . thats only functionality Deliverables :PCB Schematic with Gerber file Code

Looking to develop a coding software for kids similar to scratch 3.0. The software will have features similar to the open source scratch platform with added extensions and custom additional features to support other functionalities such as hardware interaction with arduino and esp boards.

read the eva-dts data with Arduino and DDCMP protocol

I'm looking for an expert in Arduino firmware and driver libraries. The goal is to create a library for a variety of sensors/modules controlled by Arduino Nano. We would start with simple modules (buttons,buzzer,accelerometer,…) then next jobs would involve harder ones (Ethernet,oled,wifi,etc.). We already have a few modules done that can be used as template. We are looking for someone who would like keep working with us for more modules in the near future if possible. All your code will be tested with the real modules so you must know how to debug and fix if needed.

Hi, I need you to do this: Connect Arduino or ESP32 to somewhere in internet. //I will provide domain, and hosting After even interval of time MCU add random data to the internet database. //I will create the database, and provide credentials The random data is of type float, and char. Make a page that read form the database, and display its content. Make the MCU to read a certain database record, and sore it in its memory. Use ArduinoIDE for programming. This is an introductory project. I will require understandable code, and comments. I may or may not require a discussion on the project. Tx!

Dear sir or madam. I would need help with programming. I already have an arduino program for my design (pcb with atmega328 ic) - it is about temperature regulation and also I use 1.3inch lcd display with ST7789 board for showing data. The problem is that if the screen freezes, it doesn’t refresh automatically and stays freezed (I need to unplug and plug again the power). I would probably need separate program for the screen, which would recognize when the screen freezes and then refresh it. Or do you maybe know any other solution? I hope that someone could help me. Have a nice day! Gašper Vidmar

We are in the end phase of developing several new tabletop products for the professional food industry. We want to create a great user experience for the interface. The first project would be to take over the software from one of our R&D partners - he makes the PCB prototypes and some of the mechanical solutions. Originally we just wanted to use DWIN but as he changed to a Raspberry screen, he programmed something in Python PyQT just as a method of controlling the product. It works, but it needs a talented UX developer to create a far more intuitive and more attractive interface. We would also like to add a language pack. Originally we just wanted to use DWIN but as he changed to a Raspberry screen, he programmed something in Python PyQT just as a method of controlling the produ...

Ζητείται άτομο για την απλοποίηση ενός τηλεκατευθυνόμενου οχήματος ( το παρέχω εγώ) που μέσω Arduino να ανιχνεύει ζωή.

Interfacing a Dwin HMI display to display a string at a specified address via an Arduino Arduino used should be Arduino mega 2560, the given dwin HMI display is DMG80470C070_15WTR Arduino is connected via a TTL<->RS232 convertor to the display the string obtained, which is to be displayed on the display is variable in nature and will change into the corresponding value in the full program this snippet is designed to slot into

Necesitamos capturar datos EVA-DTS de máquinas de vending con dispositivos tipo Arduino.

I'm looking for a freelancer to help me connect a Windows 11 PC to an unknown USB device and dump the firmware. It is a handheld device and a USB connection will be needed. The freelancer will need to be able to read and write the firmware from the device. All details should be carefully handled and no malicious data or code should be written to the device or sent over the network. The device should not be damaged or modified in any way. The output of the project will be the firmware for the device which must be isolated and kept secure with the capability to rewrite the firmware back again (or after modification). An ability to decompile/analyse the firmware once downloaded would generate another project of similar worth. At the moment I cannot find any USB drivers for this unit. ...

I am looking for an experienced programmer to create a firmware program for an MSP430 microcontroller, using the Code Composer Studio (CCS) platform. This will involve strong coding proficiency in C languages, as well as familiarity with MSP430 and the CCS platform. I do not have source code available for this project; the programmer will be required to create the program from the ground up. I do have a specific hardware requirement, namely the MSP430 microcontroller, which must be compatible with the CCS platform. The ideal candidate should be a reliable and detail-oriented programmer with expert knowledge in coding in C languages and a proven history of successful completion of microcontroller programming projects. A strong understanding of electronics is also essential to ensure the...

Hi, looking for someone who can help me to get access to an Aurix Microcontroller. Basically I need to be able to access and read/write the areas, such as BROM, HSM, PFLASH AND DFLASH. Need also assistance on how to connect the correct debugger. Thanks

Is there any posible way of measuring moisture in grain with arduino? What sensor to use? Are there any cheap sesor which can do that?

We have a bottle stickering line where bottles go over a Assembly line where the bottle goes through a product sticker (marked with a laser sensor). when the laser sensor has been triggered a new label will be pushed foward for the next bottle. This system is now broken. This works with a HMI touchscreen. The manufacturer does not respond back, so we need to make a new solution. I am thinking about a arduino/esp32 for the coding. We have relais, the wave a plc controller type: DVP-14SS2 (if even needed) We have a large steppenmotor and a label reading unit (that can be ignored if we use the sole steppenmotor). Can someone help us with this so that the sticker unit can work again. We have many more projects within our company, so it will be a longer cooperation.

I have a battery cell balancer with a Bluetooth app, I have already wired a UART-USB converter to the chip and I am reading data successfully from balancer via Termite. I only need to analyze this data now and write code to display cell voltages. This is data I am receiving from Termite: I have the protocol document also 05 2c 02 2b 56 01 02 02 3a 6a e2 6e 1b 08 02 02 .,.+V...:jân.... 22 03 02 20 02 02 02 02 fc 1d 24 81 60 5e 00 02 ".. ....ü.$`^.. 42 95 07 d5 17 fc 02 02 02 80 06 02 02 02 02 02 B•.Õ.ü...€...... 32 2 1d 2f 81 61 5e 00 02 42 95 07 d5 1f fc 02 02 02 ./a^..B•.Õ.ü... 80 06 02 02 02 02 02 12 €....... 19 24 81 60 5e 00 ...

We are an office with countless files. To make it easier to find these files in the future, each of them is to be fitted with an RFID sticker. About five rooms are to be equipped with a UHF reader on a Raspberry Pi. At one workstation, it should be possible to assign RFID stickers to files; this should be made possible via a web interface. It must also be possible to search for files via this web interface. This includes the name of the file, the file number and the RFID code. All UHF readers should then be addressed via a "Find file" button and search for the file (or the RFID sticker). The reader that receives the strongest signal should report that the file is in its vicinity. also we need to use a reader with a wide range, probably at lease 5 meters indoors

THE ROBOT WILL HAVE CAMERA which will read text written and then convert that text to code and perform operation. Like if we write turn right, then it should command robot to turn right.

Hi review the code for controlling stepper motor using joystick and check distance by ultrasonic module that written by arduino ide and accel library

We have a bottle stickering line where bottles go over a Assembly line where the bottle goes through a product sticker (marked with a laser sensor). when the laser sensor has been triggered a new label will be pushed foward for the next bottle. This system is now broken. This works with a HMI touchscreen. The manufacturer does not respond back, so we need to make a new solution. I am thinking about a arduino/esp32 for the coding. We have relais, the wave a plc controller type: DVP-14SS2 (if even needed) We have a large steppenmotor and a label reading unit (that can be ignored if we use the sole steppenmotor). Can someone help us with this so that the sticker unit can work again. We have many more projects within our company, so it will be a longer cooperation.

Hi, I have a small sailing boat which is moored in the middle of an harbour. I would like to monitor using GPRS 2G network (via Telegram) or SMS the following itens: -gps position. -temperature and humidity using the Dht11 sensor. -battery voltage. -water on the bilges. I would need also alerts for low voltage on the boat battery or high bilge water level. I have been successful in measuring the Dht11 output using WiFi and the following tutorial: However can't do it using WiFi. I'm using the TTGO T-Call V1.3 ESP32 sim800l board and dht11 sensor. Would like to continue to use the same hardware in the project. Could you please provide me a quote for the development of the code? Best Regards

Necesito crear un software que conecte simulador de vuelo con placa basada en Arduino. Para entrada y salida de switch , led, encoder.

I want someone experienced person to solve this task ,need a Arduino ide program for esp32 or esp8266 with TTl to Rs 485 converter to read modbus holding registers of any device,with wiring diagram.

I have made a analog input project having load cell the value of loadcell is read by esp8266.

I need an indoor air quality sensor (ideally from Sensirion or at least a basic CO2 sensor) connected via Arduino and IFTTT or your preferred platform and protocol to Philips Hue lights. I would like to get the final hardware solution. I don’t need only a developer doing the coding. I want to get a hardware that I can plugin, connect to my wifi and get the signals into Hue lights.

I have a mcu that has an anti read data protection sytem, and i want someone to help me trojan this mcu to extract the hex file that is originally on it

private swimming pools are often cleaned with pool robots. We want to develop a pool robot which can establish the pool size and shape under water (by means of under water sensor) and develop an efficient cleaning pattern. Then automatically execute the program requested (floor, waterline, wall cleaning and everything together). The robot can orientate itself in horizontal and vertical axis, knows it position relative to the pool at all times and can be picked up after job done and hauled out of the pool by the user. Robot can also be individually guided to certain spots/ stop/ start/ turn via remote control superseding the current program. Experience with underwater sensor, ultra sound sensor a definitive advantage, need to see relevant work details which makes me believe you are up for ...