Wireless controllerPekerjaan

...needs to be available through a web interface. This online access will allow me to monitor multiple batteries from a central location, offering more convenience and control. Ideal Skills and Experience: - Experience in designing and developing electronic hydrometers or similar IoT devices. - Proficiency in interfacing such devices with microcontrollers. - Data should be passed to serial port of controller - Understanding of battery health and the importance of specific gravity measurements in lead acid batteries....

Develop schematics, PCB and firmware for a compact NFC reader. The suggested RFID controller is PN7160. Microcontroller - STM32 0) Two boards - antenna and the main board. The antenna diameter is 15mm with a hole in the center 4-5mm. The main board is 14mm in width and length is 35mm or less. 1) The reader must read and write password-protected memory blocks in Mifare Classic cards. 2) The reader keeps the password for the RFID cards as a hard-coded constant. 3) The reader has an 4-byte reader ID stored in its EEPROM memory. 4) The RGB LED on the edge of the main board, whose location matches the hole in the antenna. RGB LEDs are connected to the PWM pins of the controller. 5) A waterproof (if possible) speaker must be on the opposite edge of the main board, closer to one si...

...fabrication to create a custom controller for my shop. The primary objective of this task is automating some key processes, with a special emphasis on security. Below are the specifications for the PCB controller: • Automation of the security system: This project requires designing a custom PCB controller which will integrate with various elements of the security system for automation. • Incorporation of alarm systems: The controller should easily synchronize with alarm systems, enabling automated responses in case of triggered alerts. • Seamless integration with access control systems: I wish to automate the access system in my shop, hence the PCB controller must be compatible with modern digital access mechanisms. • Door sens...

I am in need of an experienced electrical engineer to assist with spec'ing an electrical system. The system design. -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already ...addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that are already spec'd. You will need to spec the PSU, and design the PCB board for the micro controller and for the peripherals required. I will buy all the componentry based on your specification and do the programming myself using arduinos firmware. Electrical Sche...

...modern, sleek, and commercial image. - Mechanical and Electrical System Design: We need a team with a strong focus on engineering, able to create systems that are energy efficient and innovative. - Innovations: This is an important aspect of the project. We're looking for a team that can bring fresh ideas to the table, with a particular interest in self-driving capability, voice control assistant, wireless charging, advanced safety features, and an innovative AutoCharging system using the car's tire motor. Ideal freelancers for this project should have experience in: - Industrial design and 3D modeling - Mechanical and electrical engineering, particularly in the automotive industry - A creative and innovative approach to design, with a keen eye for detail - Past experi...

...values of the discrete component and use a much better MOSFET to meet the required output of 600V AC, 0.5A, 39kHz Responsibilities: - Improve the LT Spice model for the half-bridge circuit (no rectifier needed), Output is AC and not DC - Conduct detailed simulations to analyze performance - Optimize circuit design based on simulation results The MOSFET part number is SIHP24N80AE-GE3, The PWM controller that will send the pulse to the gate driver is UCC28086D, and the isolated gate driver UCC21550BQDWRQ1. It would be good to use parameters from these components where applicable for a representative test. For example, changing the MOSFET to the one with low Rds On - Drain-Source Resistance will give square output at the section labeled square wave. I have also attached the type...

I'm seeking a skilled robotics engineer to simulate basic robotic movements in Gazebo. My project's scope includes: - Engineering a robotic system to perform automated maneuvers. - Implementing basic movements such as forward motion, turning, and stopping. Your expertise should ideally include: - Proficiency in robotics engineering inclusive of controller expertise and Gazebo simulation. - Familiarity with automated systems and their movements. I anticipate this project to be less complex but I demand accuracy in basic functions.

I'm in need of a web developer with experience in ASP.NET MVC (Model-View-Controller) web framework to create a news-focused informational website about video games. Specifically, the site will concentrate on video games news. The successful candidate should possess the following skills: - Strong proficiency in the ASP.NET MVC framework - Understanding of news website structure and functionality - Knowledge or interest in video games would be beneficial - Previous experience in designing and building news-websites would be a significant advantage The website should have an engaging, easy-to-navigate user interface that offers a seamless user experience. A keen eye for attention to details would be appreciated. The point is to make the latest gaming news easily accessible and...

I have a Windows 2019 Server acting as a Domain controller to which I have administrator privileges. My PC connects to the Domain and there are 3 users who logon to the PC/Domain. They are Michael, John and Peter. I want to set a default username for the PC in the format DomainMichael so that no matter who logged on last, whenever they logout then the logon screen will always show DomainMichael. Ideal skills & experiences: - Proficient with Windows Server 2019 Active Directory and Registry Editing - Experience in creating new user accounts with specific permissions. - Attention to detail to ensure the username is configured correctly. Looking forward to your bids.

I'm looking for an experienced Avaya specialist to assist with the configuration of our Avaya Session Border Controller (ASBCE) - specifically, to set up and integrate it with SIP Trunk Provider lines and Avaya IP Office Server Edition. AVAYA IP Office servers are already configured and calls working internally. - The tasks involved are both the installation of the ASBCE and the setup and integration with the SIP Trunk Provider. This requires a comprehensive understanding of both Avaya systems and SIP technology. - The primary goal for this configuration is to achieve a seamless integration between the ASBCE, the SIP Trunk Provider, and our Avaya servers. The focus is on ensuring robust communication and operation between these systems. - Basic training on how to restrict ex...

Hi there. I'm running XCode 15.3 and I need a few pages done with simple, clean storyboards and View Controllers. I use Alamo Fire and Swift, so if you could use that to pull my data via my API links and display it in several pages that would be great. Categories > Collections > Items > Item Details You select one and it shows a list - Item Details is one record from a MySQL db I need each selected item to be a variable in the code of the ViewController so if I use the print function, I can see it at the bottom of XCode. I'll give you the 3 or 4 API webservice links. I can give you a super simple app to put it in too...

I am looking for a ...incorporating elements that symbolize support, stability, and ease of use, while also promoting a sense of dignity and independence for the users of these products. The logo should be versatile and easily recognizable, with a stylish and approachable aesthetic that appeals to a wide range of audiences.   Brand Products: Desktop Small Whiteboard with Storage Cord Management Under Desk Desk Lamp With Wireless Charger Keyboard Tray Under Desk   Let’s see your creative ideas! Please submit files in PNG, JPG, AI and PSD versions. We look forward to receiving exceptional entries that capture the spirit of our brand, and we are excited to reward the winning designer with a generous prize. Thank you for your interest, and we eagerly anticipate your c...

...focus of this project is on two key aspects: - **Wireless Connectivity**: Your expertise in designing wireless systems is crucial for this project. The RFID system needs to communicate with our central hub seamlessly, so ensuring a reliable wireless connection is a priority. - **Energy Efficiency Optimisation**: The system to be developed should be as power-efficient as possible. We need the RFID system to function optimally while conserving energy, ensuring long-term sustainability and performance. **Specifics of the Project**: The project is specifically for an RFID system, which comes with unique challenges and requirements. Since the system will not require encryption for secure data transmission, the focus is primarily on a strong wireless connection ...

I am in need of an experienced individual to assist in the development of a Wireless Sensor Network (WSN) simulation . The main focuses of this project include performance evaluation, energy consumption analysis, and routing protocol comparison. Key Requirements: - Previous experience in WSN network simulation - Able to develop a proprietary MAC protocol - Proficiency in relevant programming languages and software such as NS2/NS3, MATLAB, or OMNeT++ - Strong understanding of WSN system design Your primary role will be to help me create a comprehensive simulation that accurately represents a WSN network, as well as develop and test a proprietary Medium Access Control (MAC) protocol. This will require a keen eye for detail, a solid understanding of network architecture, and a strong...

I looking for someone to design a PCB to include an MCU, Wifi module, and some headers Key Requirements: - The PCB should have an STM32 microcontroller (MCU) to carry out basic functions. - The design should incorporate an ESP32 Wi-Fi module for internet connectivity and a motor controller. - The complexity of the project is minimal. Deliverable: Using EasyEDA to design the PCB, I ask to receive a copy of the project, Gerber files, BOM, Pick and Place, and any other files required to manufacture the PCB. Ideal Freelancer: - Proficient in PCB design. - Experience with integrating MCUs and Wi-Fi modules. - Able to deliver a simple, no-frills design that works effectively. Please provide me with your quotes and examples of relevant projects you have worked on.

...Simulink and PID control systems to develop a model for the active suspension system of a vehicle, with a particular focus on using electromagnetic actuators. While I'm not completely certain about specific performance targets, I would like the model to be versatile enough to prioritize either ride comfort or handling performance. The base model is provided, this is missing an actuator and the PID controller which is required by you. Expected deliverables: - A thoroughly tested and validated Simulink model for the PID control of an electromagnetic actuator based active suspension system as mentioned in the document. Ideal skills and experience: - Extensive knowledge in PID controls, specifically for suspension systems - Proficiency in Simulink and system modeling - Solid ...

...hunt for a specialist who is knowledgeable and skilled in wireless communication and operation research. For this particular project, you will be required to: 1. **Implement an Algorithm**: You need to able to masterfully implement an algorithm that is central to this project. Demonstrated experience in this field is necessary. 2. **Create Mathematical Model**: You must also be able to develop a precise mathematical model. Background in operation research would give you a substantial edge. 3. **Outcome of the Project**: Ultimately, the effort you invest in implementing the algorithm and creating the mathematical model needs to result in the optimization of the system. The perfect candidate for this project is well-versed in wireless communication, particularly cellu...

I'm in need of a programmer who is skilled in C++, Python, and has experience with PIC Kit 2 microcontroller. The job entails both programming the PIC Kit 2 and working on a specific project involving its application. Ideal Skills and Experience: - Proficiency in C++ and Python. - In-depth understanding of microcontrollers, with specific experience in PIC Kit 2. -...project involving PIC Kit 2. -Ability to understand PLC logic along with programming. Please note that I'm looking for someone with a strong background in these areas, as the project may involve complex programming tasks. If you believe you have the necessary skills and experience, kindly reach out to discuss the project in more detail. We are working on IC (PIC16F772) for automatic water level controller, v...

...recording was done using podtrak 4 and rode wireless microphones, however, the output quality is not satisfactory with several issues needing attention: - Background noise: There is a significant presence of unwanted sound. - Echo: A constant echo is running throughout the recording. - Unclear voices: The speakers' voices are not clear enough. This might be a gain issue. The improvement on the audio quality needs to be made post-recording and not during the recording process. The final audio file after enhancement should be in MP3 format. Ideally, turn around in 24 hours Perfect candidate would be experienced in audio engineering, especially in dealing with similar podcast quality issues in the past. Familiarity with podtrak 4 and rode wireless microphones w...

...【1. Background】 This technology pertains to a system for updating the programs of devices installed in vehicles. Many devices are installed in vehicles, and these devices store programs. It has been proposed that by updating these programs, the functionality of the devices can be improved. In particular, it has been proposed that by receiving data for program updates from an external server via wireless communication, it is possible to update the program without going to a service station or the like. In previous technologies, a specific device functioned as a master device and updated the programs of other slave devices. However, this had a problem. That is, the master device had to perform processing dependent on a specific device configuration of the vehicle, and to cope with ...

...IoT solutions in the supply chain - Analyze the impact of IoT on the supply chain for lithium-ion battery production Ideal Candidate: - Extensive experience with IoT and its applications - Proficient in Python development and cloud data management - Comprehensive understanding of supply chains, specifically in lithium-ion battery manufacturing - Familiarity with PLC & SCADA, Edge Computing, wireless sensors and gateways - Strong research writing skills to aid in the comprehensive explanation of findings - Knowledge of MATLAB and Statistical Analysis tools would be an advantage. Your contribution could profoundly impact the efficiency and resilience of lithium-ion battery supply chains. Your work will not only provide immediate value to this research project, but could also...

I'm looking for a professional who can guide me on filming a meeting with 3 iPhones and wireless lavalier mics. The goal is to have the video and audio well-synchronized for post-production editing. Key Responsibilities: - Set up 3 iPhones for optimal video quality - Configure wireless lavalier mics for clear audio - Advise on real-time synchronizing of video and audio Ideal Skills and Experience: - Extensive experience with video production - Proficiency in using iPhones for filming - Knowledge of wireless lavalier mic setup - Understanding of real-time video and audio synchronization Meeting Length: Less than 1 hour Environment: Indoors with controlled lighting I need assistance in all aspects of this setup, including ensuring that the video and audio match ...

...control: The controller coordinates the motion of the cantilevered gate, prompting the drive mechanism to follow a specific motion curve, guiding the gate along its intended path. Safety integration: It interacts with sensors embedded in the gate, such as photocells and safety edges, to detect obstacles or obstructions along the gate's path, triggering safety protocols to halt movement or make a relief motion, as chosen in a programmed ‘Safety response choice’ - function. These safeties are divided into following: - Safe O, detects only in opening movement, e.g. torque feedback - Safe C, detects only in closing movement, e.g. the photocells and torque feedback - Safe O-C, detects in opening and closing movement, e.g. the safety edges Commands: The program w...

As a thriving business, maintaining the health and security of our office...project include: - Analyzing network security: We need a professional understanding of our potential vulnerabilities and the advisable improvements to ensure optimal security. - IT infrastructure: The focus should be on our existing Local Area Network (LAN) and Wireless Network. Familiarity with these infrastructures is thus key. - Access Control: The review should delve into our implemented security measures – primarily access control. Recommendations for enhancing our current setup are expected. In-depth knowledge of LAN, Wireless networks, and access control security measures is highly desirable, as is a keen eye for detail. By the end of your audit, we anticipate a safer, more secure, and r...

...out unnecessary messages and optimize system performance. Responsibilities: Apache Kafka Setup: Install and configure Apache Kafka on a Windows machine. Set up the necessary Kafka topics, partitions, and brokers to support distributed messaging. Ensure proper security configurations and access controls are in place. Master Script Development: Develop a master script that acts as the central controller for the messaging system. Implement functionality to bulk-review messages in the queues every 10 minutes. Design and implement filtering logic to identify and remove unnecessary messages based on predefined criteria. Coordinate the distribution of messages to worker scripts for further processing. Worker Script Development: Develop worker scripts in Python to process messages r...

I am seeking a professional and capable freelancer to create a home automation system using Arduino technology. The system should incorporate ...should incorporate some form of MIDI control for traktor Dj software - **Expertise Required** - Strong knowledge of programming Arduino. - Prior experience in home automation design and implementation. - Proficiency in achieving interoperability between different smart home systems. - Familiarity with MIDI controls. - **Key Features** - The use of knobs, faders, and buttons on the MIDI controller to enable intuitive interaction with different systems. - Lighting control: an easy-to-use and versatile system to control various lighting fixtures around the house. Please provide examples of similar projects you have completed p...

I'm in need of a skilled professional who can create a WiFi controller with a QR Code generator for my Aruna 9012 default captive portal. Key Project Requirements: - WiFi Access Control: This system should allow me to control access to my network based on both time and specific user permissions. - QR Code Generation: The project will require the generation of various QR code types: - Static QR codes: These QR codes will be unchangeable and ideal for permanent access of the network. - Dynamic QR codes: These QR codes must be generated on the fly and will allow immediate, temporary access to the network. - Customized QR codes: I would also like the ability to customize the QR codes with my branding or other information. Skills and Experience: - Proficiency in WiFi ne...

Hello I'd like you to create an ePaper module PCB used for an electronic shelf tag based on the ESP32 chip. This device is similar to what you would find at a modern retail store, dynamically updating the tag as prices change. Attached are schematics and references for my desired components. I'd like to use the new ESP32-C6-MINI-1-N4 unit as the main controller, as I'm very familiar with ESP programming already, and want to take advantage of its many connectivity options including BLE, Zigbee, and Thread. The ePaper display itself will be the Pervasive 2.13" display using the ZIF25 connector and SPI protocol. Schematics and additional reference details are attached, please read these carefully to ensure the ePaper display module functions accordingly. It will ...

I'm in need of someone who undrestands Windows Certificate Authorities. I am trying to setup Windows Hello For Business but am getting a KDC error: The client has failed to validate the domain controller certificate for SERVER.DOMAIN.local. The following error was returned from the certificate validation process: The revocation function was unable to check revocation because the revocation server was offline. Key Requirements: - [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions] - This environment requires me to control the input. This means I can only give you view only of the server.

...facing difficulty getting the petrol pump controller to communicate with the local MSQL database. Key Points: - The PC is running on Windows XP. - The petrol pump controller uses a serial port for communication. - The issue lies in configuring the connection between the petrol pump controller and the MSQL database. Requirements: - You'd need to have a strong grip on database management, particularly with MSQL. - Proficiency in networking and serial port communication is a must. - Experience with Windows XP is preferred. - Troubleshooting skills and experience in resolving connectivity issues will be highly valued. The ideal candidate for this project will be able to quickly identify and resolve the issue, ensuring that the petrol pump controller can ...

I'm seeking a skilled programmer to assist in developing a taekwondo scoring system. The project entails crafting code for a system comprising one master and four slave devices all to be programmed using Arduino. Wireless communication between the devices will be facilitated through the ESP-NOW protocol. The job entails several key responsibilities: For the SLAVE devices coding : 1. Each slave device should feature an initialization green LED that indicates successful wireless communication with the master device. 2. Additionally, each slave will have two LEDs, one red and one blue, which will illuminate when specific buttons (B1 to B3 for blue team, R1 to R3 for red team) are pressed by the user. 3. With a total of six buttons per slave device, each responsible for as...

I'm seeking an academic researcher who can delve into the intricate world of MICROGRID WITH PV , MPPT CONTROLLER , EMS (energy managemt system) solar energy. The ultimate goal of this research is to produce an article or paper that meets Scopus standards with simulation by Matlab. Condition The researcher should have published papers closed to MICROGRID and EMS. Please share your Google scholar profile.

I'm seeking an experienced videographer to create a UGC (User Generated Content) video for our car stereo. This video will play a key role in informing our customers about the key features of our product. Here's what I need: - Unboxing - Easy Installation Guide - Features Demonstration: Highlight the wireless CarPlay/android auto connectivity, touchscreen interface main features, and front & backup camera. Ideal skills and experiences: - Proven experience in creating UGC videos, ideally for automative, tech-products. product link:

I am working on a project to develop a wireless sensor for vibration analysis. I have already defined some components of the system. I need someone with experience in electronic component design to help me evaluate the chosen components and assess the feasibility of applying these components in a prototype. This person will be responsible for the PCB's technical design (Gerber and CAD) and prototype testing. The hardware design must consider hardware and firmware (software) limitations. My initial idea is to use a Seeed Studio microcontroller controlling different types of accelerometers. If the person has a better approach, I have no problem following their advice. Below is a list of the components I am considering using in this project: Sensors:

I'm in need of a creative and talented logo designer to create a modern and minimalistic logo for an Internet Connectivity service. The company offers businesses and professionals an unbreakable connection to the Internet via their software and hardware solutions. This is done by bonding two or more internet connections into one resilient stream. The connections can be wired, wireless, or a combination of both. The ideal candidate should have a strong understanding of branding and design principles, as well as experience in creating logos for various mediums. Key requirements: - Design a modern, minimalistic logo - Suitable for both online and print mediums - Versatile for use on websites, social media, business cards, flyers, merchandise, and packaging - The logo must be cre...

I need to create a small educational program for work related to PLC. OBJECTIVE: I need to do a job, where a program reads 3 numbers and sorts these 3 numbers in ascending or descending order, and checks which one has the highest value. The software to be used is OMRON's CX-Programmer. The controller would be Omron's CJ1M. This work is for educational purposes so it should be simple but well structured. The structure of the program should have some similarities with the attached images (ATTACHED IMAGES ARE AN EXAMPLE ONLY)! Please try to use simple or the more commun functions. As it is an educational program, it must be as simple as possible, but at the same time it must be well structured to presentation. Thanks IMPORTANT: The software to use is CX-Programmer (v9.73)...

Need some to program me a small function in this sdk to add RFID verification & then open gate for the user using following SDK.

...100 forwarded ports OR a dedicated IP for each server. Each server requires: - 16 GB of RAM per GPU - PCIE 4.0 x8 / 3.0 x16 bandwidth per GPU - At least 8 CPU threads per GPU - ***A graphics device that will not be passed through for customers, e.g. an old GPU, the integrated graphics of a CPU, or of a motherboard that supports it (e.g. the Asrock Rack ROMED8-2T comes with an onboard graphics controller)*** Ultimately, this will be a marketplace for compute. People will pay less for a virtual machine with a GPU with inadequate bandwidth (e.g. PCIE 3.0 x4) than a GPU with adequate bandwidth (e.g. PCIE 3.0 x16), as they'd be able to run more intensive workloads. The quality of your hardware will determine your earnings. need hosts to have integrated graphics, another older...

Further development charge controller ISO15118

Create a new version of our existing ABCs feature with images instead of static letters. This page should be created with Storyboard and a View Controller in Swift for iOS XCode. And it should work in both iPhones and iPads and be a full-screen page with a white background - image in middle and arrows on left and right.

Seeking someone with skills in Arduino and MIDI technology. Your task will entail creating a connection between LoraMidi AtMega1284P and Arduino IDE. The main objective here is to control MIDI devices using this interface. What I Need: - Develop a way to control LoraMidi AtMega1284P using Arduino IDE - Enable wireless transmittance of MIDI data - Develop a custom LoraMidi communication protocol Ideal Freelancer: - Proficiency in Arduino IDE - Familiarity with LoraMidi AtMega1284P - Experience in MIDI technology There is not a strict deadline for this project, and we can prioritize quality deliverables over speed. Please submit your proposal detailing how you intend to accomplish the indicated tasks.

I'm seeking expertise to design an IoT device incorporating UHF RFID technology. The device will be fundamental in inventory management and asset tracking within a confined space. Requirements: - Experience with UHF RFID technology - Understanding of IoT device designing - Ability to work with short-range applications, particularly with...Inventory Management Solutions - Asset Tracking Experience - Short-range technology implementation. Looking to create a IoT Device that we can install in a location, have multiple antena's, and is small and easy to power. Location of installation will be in cabinets and fridge/freezers, that is my multiple antena's will be required. Device should have a wireless module to connect to network, small onscreen display, and easy way t...

I need to create a small educational program for work related to PLC. OBJECTIVE: I need to do a job, where a program reads 3 numbers and sorts these 3 numbers in ascending or descending order, and checks which one has the highest value. The software to be used is OMRON's CX-Programmer. The controller would be Omron's CJ1M. This work is for educational purposes so it should be simple but well structured. The structure of the program should have some similarities with the attached images (ATTACHED IMAGES ARE AN EXAMPLE ONLY)! Please try to use simple or the more commun functions. As it is an educational program, it must be as simple as possible, but at the same time it must be well structured to presentation. Thanks Regards

I'm in need of a skilled product designer, pa...the use of Fusion 360, to aid in the creation of a cutting-edge electronic medical device. This project demands precision, knowledge of industry standards and familiarity with medical device Key project features include: Ideal skills for freelancers: - Proficient in Fusion 360 - Experience in designing medical devices - Outstanding knowledge in electronics - Versed in design compatible with wireless connectivity - Strong portfolio in creating device designs. Details: modify and widen the base to insert the new compressor 247cm x 245cm also as per photo modify and make the external part of the external base more beautiful I have provided an extremely detailed step file modify and large I look forward to witnessing your inno...

I'm looking for a proficient IoT expert who can connect a ShellyUNI wireless sensor to a Node-Red flow using Mosquitto MQTT broker. Notably, my Node-Red is already installed and functional on a Raspberry Pi4. Key Tasks: - Configure the ShellyUNI wireless sensor to accurately transmit 0 to 12 DC volts. - Set up a system that enables data transmission every minute from the sensor to the Node-Red. Skillset Required: - Excellent knowledge of IoT - Extensive experience with MQTT, specifically using Mosquitto broker - Familiarity and hands-on experience with Node-Red on Raspberry Pi - Previous work with ShellyUNI wireless sensors The ideal freelancer for this project should have hands-on knowledge of working with ShellyUNI sensors, MQTT brokers, and Node-Red flow...

I'm in search of a skilled cybersecurity writer to create a comprehensive article on PLC (Programmable Logic Controller) Algorithm Security for a professional audience. Requirements: - The article should delve into in-depth technical analysis, offering thorough insights and understanding of PLC Algorithm Security. - The preferred word count for this piece is 1000 - 1500. - The target audience is primarily cybersecurity professionals; the content should be engaging and informative for this group. - A clear focus on critical insights and mitigation strategies in the realm of PLC Algorithm Security is a must. Ideal Skills and Experience: - Proven track record in cybersecurity writing. - An understanding of the nuances of PLCs, industrial automation, and cybersecurity. - Ability...

I'm in need of an Arduino Programmer with expertise in DC motor control, programming logic, and inductive proximity sensor integration. Specific tasks include: - Programming logic for the DC motor microcontroller - Integrating an inductive proximity sensor for object detection - Implementing a speed regulation function (slow start, slow stop, foward, reverse speed and delay start) for motor control Please find the project detail on the attached document.

Silakan Daftar atau Login tuntuk melihat rincian.

...Bluetooth or BLE technology, or similar technology, to transfer and receive small packets of data wirelessly between mobile phones, or cell phones, of the same and differing operating systems in a Mesh Network. There would be multiple users of the app within a 30 metre radius locality using an ad hoc, node to node, wireless system. The app must therefore have no reliance on WiFi, mobile data or any use of a WAP or a WiFi router. It can maybe use a technology similar to Z Wave or Zigbee wireless technology, and maybe use a method like PairAsync for pairing or connecting. The app must have a high level of security using HTTP, SSL, TLS or similar, and must encrypt and decrypt all data during transit and at rest with advanced security features like LESC, and using systems such...

I have 2 issues that are occurring with my app. Both of these issues are now happening on my app in the store when no changes were made. In other words, these crashes are not from any changes I made. It just started to not work. The first issues occurs when trying to login. It is timing out. This is the second error ...raitCollection(UIViewController *__strong, UIApplicationSystemVersion)(), UIViewController.m:2749 *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'UIViewController is missing its initial trait collection populated during initialization. This is a serious bug, likely caused by accessing properties or methods on the view controller before calling a UIViewController initializer. View controller: <Se...