Julmar data modemPekerjaan

I have windows 10 computer and this computer is connected to internet modem via ethernet cable and also I have telephone device which is connected to the internet modem too (it is cloud phone it is connected to broadband modem), the phone device works fine and it shows the called phone on its screen. I want to build C# software which can obtain the caller phone number from this broadband system (the internet modem) and display it on this C# software

Server recently rebooted is itself after update. I can see my Magento and odoo instances on my internal network but they are not visible from outside. We run pfsense and debian running odoo and Magento, connected via Cisco modem. Cisco modem, windows server or pfsense may have a NAT issue, I am unsure.

Project Description: I am looking for a freelancer to help me with creating some data collection python scripts. This is for a solar remote water pumping system and will be connected via cell modem. We are planning on running the interface software on a RPI or similar SBC recommendations accepted :-) Two devices will be monitored 1) EP Solar tracer series charge controller (RS 485) - with RS 485 - USB adapter 2) X320 controlbyweb data aq unit (modbus tcp) same local network. : flow sensor and pressure sensor Solar parameters and the flow sensor and pressure sensor will be gathered and sent to a web server via get request (I will take care of that side) A extra bit of logic will need to be added "in the event the load on the charge controller load outp...

SMS Machine Connection and API Development Project I am looking for a skilled freelancer who can help me with the following project: SMS Machine Connection: - I need to connect an SMS machine to my Apache server - The connection can be established through a GSM Modem, GSM Gateway, or SMS API API Development: - I require the development of multiple APIs to facilitate the SMS machine connection - The exact number of APIs needed will depend on the project requirements Ideal Skills and Experience: - Proven experience in SMS machine connection and API development - Strong knowledge of Apache server and SMS technologies - Ability to work with GSM Modems, GSM Gateways, and SMS APIs - Past work and experience in similar projects is highly preferred If you are a detail-oriented freelanc...

I am looking for a skilled Linux expert to help me debug a modem connection problem on my system. I am using a USB modem and have been experiencing issues with connecting to an SMS gateway. Specifically, I am facing the following problem: - Unable to connect to the SMS gateway This issue has been affecting me for less than a week. Ideal skills and experience for this job include: - Strong knowledge of Linux operating system - Experience with debugging modem connection problems - Familiarity with USB modems and SMS gateways 2023-07-02 22:38:41 [81567] [6] DEBUG: AT2[A]: detecting modem type 2023-07-02 22:38:41 [81567] [6] INFO: AT2[A]: opening device 2023-07-02 22:38:41 [81567] [6] ERROR: AT2[A]: open failed! ERRNO=2 2023-07-02 22:38:41 [81567] [6] ERROR: S...

I am looking for a freelancer who can help me with detecting and resolving configuration issues with my Kannel gateway. I am experiencing modem errors and need assistance in identifying the source of the problem. I have a specific error message or code that I can provide for further investigation. Ideal skills and experience for this job include: - Proficiency in Kannel gateway configuration and troubleshooting - Experience in identifying and resolving modem errors - Familiarity with error message analysis and debugging 2023-07-02 22:38:41 [81567] [6] DEBUG: AT2[A]: detecting modem type 2023-07-02 22:38:41 [81567] [6] INFO: AT2[A]: opening device 2023-07-02 22:38:41 [81567] [6] ERROR: AT2[A]: open failed! ERRNO=2 2023-07-02 22:38:41 [81567] [6] ERROR: System error 2:...

Connect Modem to Kannel SMS Gateway Project Overview: - I am looking for a freelancer who can help me connect a GSM Modem to my existing Kannel SMS Gateway server. - The server is already set up and running on Linux. Skills and Experience: - Experience in working with Kannel SMS Gateway and connecting modems to it. - Proficiency in Linux server administration. - Knowledge of GSM Modems and their configuration. - Understanding of SMS protocols and gateway operations. Project Deliverables: - Connect the GSM Modem to the Kannel SMS Gateway. - Configure the modem settings for sending and receiving SMS. - Test the connectivity and ensure successful transmission of SMS messages. Additional Information: - The freelancer should be available for communication and tro...

Project Title: Connecting Kannel to USB Modem Operating System: Linux Necessary Drivers: Not sure if the necessary drivers are installed for the USB modem Make and Model of USB Modem: Huawei Skills and Experience Required: - Proficiency in Linux operating system - Experience with connecting Kannel to USB modems - Knowledge of Huawei USB modem drivers and configuration - Strong troubleshooting skills to identify and resolve any driver or connectivity issues - Familiarity with Kannel SMS gateway and its integration with USB modems Project Details: We are looking for a skilled freelancer who can help us connect Kannel, an open-source SMS gateway, to a Huawei USB modem on a Linux operating system. The necessary drivers for the USB modem may or may...

I am looking for a freelancer who can assist me with the installation and configuration of playsms with a GSM modem/router for personal use. Requirements: - Experience with playsms installation and configuration - Knowledge of GSM modem/routers - Ability to provide basic configuration assistance Skills: - Strong understanding of playsms installation process - Familiarity with GSM modem/router setup - Proficient in configuring playsms for basic usage Please note that I already have a GSM modem/router for the installation. I only require basic configuration assistance after the installation is complete.

My client is a well-established VSAT provider with over 20 years of experience. As part of a re-engineering programme for their Network Operations Centre (NOC), we are seeking an on-call Senior VSAT Engineer also having experience in VSAT sales engineering and NOC administration. The main responsibilities will centre around handling complex modem engineering tasks, with a primary focus on improving the initial network activation process. We are committed to building a long-term, mutually beneficial relationship with our Senior VSAT Engineer.

I am looking for a skilled developer who can help me with my project that involves the use of ESP32, 4G Modem Hat, and OPENVPN/OPENWRT. Here are the specific requirements: - The 4G modem hat I prefer to use is Waveshare 4G Modem Hat - I have a specific brand of ESP32 in mind, which is Wroom from Espressif - The project involves integrating the 4G modem hat and ESP32 to create a reliable and secure network using OPENVPN/OPENWRT Ideal skills and experience for the job: - Knowledge and experience in working with ESP32 and 4G modem integration - Expertise in OPENVPN/OPENWRT to ensure the security and reliability of the network - Familiarity with Waveshare 4G Modem Hat and Wroom from Espressif brands would be an advantage

Here in the UK the telephone companies moved from traditional telephone wall socket to cloud telephone, the telephone is connected to internet modem or it is called VoIP. I have a computer and it is connected to the internet modem I want to obtain the caller number using C# program.

My client is a well-established VSAT provider with over 20 years of experience. As part of a re-engineering programme for their Network Operations Centre (NOC), we are seeking an on-call Senior Modem Engineer specialised in one or more of the following modem technologies: iDirect, Newtec, or Gilat. The main responsibilities will centre around handling complex modem engineering tasks, with a primary focus on improving the initial network activation process. We are committed to building a long-term, mutually beneficial relationship with our Senior Modem Engineer.

I am looking to deploy an NB-IoT system to measure and collect data on wave and stream movement from a sea float. No existing sensors or equipment will be used. The data will be collected by a server and in a later time that data will be processed by clients computer. We are contractors and our client needs one prototype only. This will not be a production project. The sensor are required to be Ultrasonic for the wave height meassurement (up to 5 meters is enough). The other two senors that will define stream velocity and stream direction need design. We do not think that exist ready made for marine use (should withstand salt). The data from the sensors will be transmitted with a NB-IoT modem to the server (this should be setup with the appropriate progr...

Soft requirements: (1) Instrumental t...becoming a cyberpunk dystopia, but not yet there. The main character saves books from book-burnings and reads choice excerpts to listeners; this is when the theme will be played. (3) Inspirations: bass and drum heavy hip-hop in the style of Toonami's Joe Boyd Vigil. (4) Additional Inspirations (optional): (4a) Shamisen, ex. (4b) Dial-up modem sound, at a volume that won't disrupt narration Hard requirements: (5) One 20 second loopable version of the theme, at a relaxed pace suitable for reading (6) One 20 second loopable version of the same theme, starting with a beat drop, and proceeding at a faster pace suitable for rising suspense (7) Intellectual property for both loops passes to the client

I'm having a networking issue with multiple client running on Windows/Android and linux. The issue appears to be a connectivity issue. Network map is the following: Modem with ISP connection [LAN]-> TP-Link CPE210 in Access Point Mode -> [wireless 2.4g] <- TP-Link CPE210 connected in Client Mode [LAN] <- Router <- Clients/End Devices. Usually I can get first device connected to the CPE210 in client mode, and other devices get a connection error/no internet. I suspect an issue on IP address assignment, but I'm not sure about this. I need help resolving this issue to get my client devices back online.

...where the majority of its modems are being recognized as "unregistered," despite the fact that the modem chips themselves are in good condition. I need someone who can thoroughly analyze the modems and identify the root cause of this problem. Your expertise in troubleshooting and resolving issues related to Quectel M35 modems will be crucial in getting this machine back to its optimal performance. Responsibilities: Investigate and diagnose the "unregistered" issue with the Quectel M35 modems in the SMS marketing machine. Identify any hardware or software-related factors that might be causing the problem. Develop and implement effective solutions to resolve the issue and ensure stable modem performance. Provide clear documentation of the troubleshooti...

...look at this video channel from another website that offers the same service of "Online SMS Verification" Using real sim cards: Once you understand the business model, you can integrate or create a correct Sim card rotation on the SMS Modem with the website. WITHOUT UNDERSTANDING THE BUSINESS MODEL, YOU CAN NOT DO THE JOB CORRECTLY. It is essential to understand the business model because it is the way to figure out how to correctly configure the SMS Modem for SIM Rotation. WITHOUT UNDERSTANDING THE BUSINESS MODEL, YOU CAN NOT DO THE JOB Skills Required. -Software Development -RESTful API -NET Core Web API -API Integration I will pay $3500 After the job is completed and tested 100% working correctly

I want to build a device that is a cellular modem with an integrated fingerprint reader, capable of providing a secure and authenticated internet connection to a Windows-based PC. The device will also host an NFC interface and a Node.js webserver for device configuration. The device needs to be enclosed in a plastic casing with openings for the fingerprint reader, a USB port, a reset button, and an RGB status LED. There is an option to focus on a Lite version first that only supports the model with filtered domains (a sperate spec was uploaded for that as well)

I am looking for an experienced freelancer to develop a GPRS modem for me. He must be good knowledge of embedded program and good in pcb schematic. The modem must be custom-built, incorporating a TCP/IP communication protocol. need product development with complete transfer include hardware n firmware.. also require api interface so that they can develop front end application All with ip transfer naee with pilot sample Kindly quote from your end As this is an intricate project, I'll require someone with a significant amount of experience and knowledge in the field. If you have any prior experience in GPRS modem development, that would be beneficial. I anticipate a complex development process, and expect the freelancer I work with to provide updates at ea...

I am looking for a freelancer who can help me with the development of a Nordic Semiconductor Thingy:53 with an Edge Impulse wrapper code and an external modem. I attached a modem with TxD/RxD, CTS and RTS pins to the Thingy:53 and now I need to send AT commands to this modem. The preferred programming language for this project is C/C++ where I am using: - Toolchain manager v1.2.2 - nRFConnect SDK v2.3.0. More info about the Edge Impulse Wrapper can be found here: More info about the Thingy:53 can be found here: Ideal skills and experience for this job include: - Strong experience in firmware

The objective of this project is to create a strong visual identity and branding for a DJ , a professional DJ based in Australia. The branding should be modem, professional, and appeal to his target audience

Hi, my name is pascal We have developped an app with python and RPI to send and receive SMS with a Waveshare SIM800C GSM/GPRS HAT We need someone that can fix a problem (error sending SMS) After, we want to add more functionnality to the app Do you think that you can help me ?

ESP32 based DLMS energy meter development using DLMS protocol. The complete open source code stack for Arduino is available, you have to adapt it to ESP32 and interface it with a 4G modem. Complete help from the stack developer and the modem manufacturer is available.

Need to register a sip phone located overseas through a mikrotik Site to Site VPN Mikrotik in Canada, running static ip on a fiber internet connection with static IP. Mikrotik overseas- in double NAT behind local internet modem. Mikrotik gets ip from ISPTel router- Canada router acting as pptp server. Overseas router dials pptp to canada router. Need all traffic destined to one particular ip routed through vpn and back. Will have access to both routers via anydesk

My project is to set-up a static IP address on a NetGear mobile router that does not have a separate modem, and is using the Windows operating system. I'm looking for a reliable freelancer who can help make my project successful. The freelancer must be familiar with settting up static IPs on Netgear routers, as well as the Windows operating system. They must also be able to effectively communicate the process step-by-step. This project could be done using remote access if necessary, and I need the freelancer to provide reliable support every step of the way. I'm open to discussing any technical details needed to ensure a successful outcome and flexible to adjusting the scope of the project as necessary. If you are an experienced professional with knowledge in this a...

I need a developer for Wifi, Router, Modem firmware development.

PCB Design and layout from KiCad project files and generate manufacturing files. Requires experience with layout for the following: - Cellular modem with external cellular and gps antenna - USB, Ethernet, Micro SD - Power supply and Battery Charger - RS-232/RS485

I'm looking for an experienced software developer to create a desktop software that will serve as an SMS COUNTER MODEM(the device has 32 sim slots). This software should be able to set short number, to send SMS with sort number example '8412' not with the phone numbers he owns. The software must be able to start before SMSCaster. This project necessitates the upmost skill and attention to detail, so only experienced professionals need apply to my project. And the payment will be made through the website but with an escrow.

I am working on a simple solution for a client monitoring an alarm station. I have a Siretta Zeta-NEP modem based on a Telit ME910C1-WW module. I am looking for a freelancer to help develop an application in Telit AppZone to run on the module to monitor a GPIO pin and input power voltage and notify a distribution list of numbers via SMS. Ideally users could subscribe and unsubscribe their number from a particular modem using SMS. An SMTP mailing list solution would also be acceptable if the SMS list is not practical. Key functions listed below SMS Subscribe - add a phone number to the mailing list text file upon receiving "subscribe" via SMS SMS Unsubscribe - remove a phone number form the mailing list text file upon receiving "unsubscribe" via SMS Aler...

I am looking for someone who can point me in the direction of hopefully free / open source software tha...(bedroom)" which GlassWire also does but I need the program to also show how much bandwidth that deviced has used over a given period of time (if the program is open in the background for 15 days, then I would like 15 days of data I would be able to save and go back to a look at later. IF GlassWire has this option I am not aware of and you can show it to me, that works, you will still have earned your money. ALSO. I a m using an AT7T NVG510 cable modem router which does not have many options. However I also have a Netgear Nighthawk X6 I can put on the end of the modem, the Nighthawk has a lot more options. If you have any questions for me, please contact and...

I am looking for someone who can point me in the direction of hopefully free / open source software th...(bedroom)" which GlassWire also does but I need the program to also show how much bandwidth that deviced has used over a given period of time (if the program is open in the background for 15 days, then I would like 15 days of data I would be able to save and go back to a look at later. IF GlassWire has this option I am not aware of and you can show it to me, that works, you will still have earned your money. ALSO. I a m using an AT7T NVG510 cable modem router which does not have many options. However I also have a Netgear Nighthawk X6 I can put on the end of the modem, the Nighthawk has a lot more options. If you have any questions for me, please contact and...

Hello: I am looking for someone who knows how to configure the remote access of 8 Channel HD Network Video Recorder Swann. I am using: Spectrum internet (Cable modem Model: "Spectrum Modem E31T2V1 DOCSIS 3.1" TP-Link switch Model: (TL-SG1016 - 16-Port Gigabit Switch) The job is to open the necessary ports of this TL-SG1016 Switch, but first, the problem that I don't have a Valid IP on MY PC must be solved and I don't know how to solve it to be able to enter the Switch at its Default IP Address that I can't find later. IP configuration must be done, troubleshooting the IP to be able to enter the Switch Via browser. This job requires AnyDesk to be able to remotely access the computer and be correctly configured

Off grid solar station with an inverter connected to an external 3-pin socket need to track how many kWh's are discharged via the plug. Current thinking is tis might be a raspberry pi with a cellular modem, ideally connected to a clamp meter or similar Data sent to an IP address that can be accessed remotely in Excel or similar format. Does this sound achievable? If so, do you have any questions to be able to provide a quote. Ideal person is based in UK and able to help with hardware procurement and testing. Potential for future feature development Paul

Having issues recently with my VoIP phone. It is set up correctly but showing as account is not registered. Background: I have a 4g Huawei router with firewall disabled and recently the phone has been unusable. It will come on for an hour every day (not at any certain time)

Hi, we are a robotic and coding course provider for primary school kids in Sydney, Australia. We run classes six days a week in normal school terms and also holiday programs during sch...knows how to manage a class (up to 20 kids), keeping the kids engaged, providing balance between entertainment and education. Having prior experience or interest in coding or robotics will be advantegous. Other Tasks Mainly you will be leading a class and deliver the teaching material Helping the kids should they need any assistance Preparing all the equipment before classes (ipads, hubs, wifi modem, etc) Organising the lego after classes Shift This will be a casual role with only two to three hours shift on the day that you will be managing the class. The rate will be $25-$30 depending on your ex...

Captive portal development expert is requested with the following tools: - Coova-chilli version 1.3.0 - Modem with OpenWRT 15.04.1 (chaos calmer) - External server with RadiusDESK (for user authentication) The tools are already installed in the modem and a virtual machine for testing. A configuration audit is required to find errors.

Looking for a partner to consult on PLC (Power Line carrier) Modem development kit selection. Please do not respond if you do not have 1 year hands on experience with these modems development. We need up to 440VAC power line, 500 KHz freq support, using OFDM (Orthogonal). We are looking at Microchip, ST, TI, Renesas etc. However, we like to consider your valuable experience & advice in this matter. This may extend to additional help from you for development, testing etc. also. The budget is just a placeholder so please ignore it and bid your best price & delivery. Must share your prior experience related to our job only, in your response.

Hi Ikhwan, I am looking for a food truck size interior design service by using autocad. There is no illustration needed but more like a floor plan or structural plan for our truck container box. Info & Requirement 1. We are running pet grooming truck, which we will drive our truck t...truck, which we will drive our truck to visit customer's house then help their pet to shower inside our grooming truck. 2. We will need Autocad service to draw the interior layout which including all the equipment arrangement and so on. 3. Major tool or equipment as follow (all the size will be give) - Bath tub - grooming table - dryer - water pump - heater - number of electrical socket - cctv - modem - water tank - vacuum machine - salon chair - staircase - electric wiring - water hose & ...

About Watson’s services: Watson’s services is a lawn care, properties maintenance and general handyman business. Project Description: A More modem, sleek style like whites blacks chromes and a splash of colours, like purple gold sliver

We are looking for a qualified Unitronics P{LC Programmer to provide the following - Ladder Logic to control Pumps and Valves - Data Logging of all events - Rain Sensor Monitoring and Event Logging - Flow Meter Monitoring and Logging - Solar Monitoring - Modem Connection Be able to convers on Video call in English.

I want to Make Industrial Control board Based on STM32 which contains 2-isolated RS485,1- Isolated RS232, 1-CAN Bus,100 Mbps Ethernet port,4G Modem, SIM Slot,Wifi, 6- Analog input 12bit (4-20 ma-3 and 0-10v -3), 4-single channel 24-bit 0-5v Analog input,3- Digital output (12v),2-DAC (0-12v)SD card Slot, 12v Regulated power Supply, Battery holder for RTC, Li-ion Battery Connector

...los datos posibles cada 5 minutos de un Analizador de redes EASTRON SDM630 mediante RS485 y envio a un servidor MQTT (Necesitara modulo adicional RS485, deberá indicarse cual y como conectarle) - ASTRONOMICO: Función que calcule el orto y el ocaso cada segundo en función de unas variables de latitud y longitud y unos offsets + - para mover un relé. - Comunicación GPRS constante a través de un modem SIM800L, con mecanismos de seguridad para evitar que nunca se pierda la comunicación.(Necesitara modulo adicional SIM800L, deberá indicarse cual y como conectarle) - Wachdog: si alguno de los hilos dejase de funcionar, deberá hacerse todo posible por reiniciar el dispositivo automáticamente. - Envio y recepci&oac...

Hi, I am looking for hardware design, which should support 1, wifi 2. 4g/5g Modem 3. ADC - 2nos 4. Spi 5. I2c 6. UART - minimum 4 nos 7. Modus chip in board 8. USB type c charging port 9. USB serial port data 10 SD supported Please let me know the quotation and time required for this

About Global : Fintech Digital Banking, Payments Project Description: Modem fintech

Hello, We need to setup multiple public IP's to be routed(natted) to our pfsense server where the final NAT need to happen to our internal servers AND the communication to the outside by those servers need to happen under these public IP's and not our main modem IP. ( Separate traffic through the router and different VLan's are already setup and in use ) Router: TPLink ER8411 Omada. Full topology is made and very clear on how the internal setup is created and required. We need someone who has perfect understanding of how nat/routing works on this particular device and who has very extensive knowledge on how to pickup these IP's in pfsense and send them through the network. DHCP has to happen on router level. Only one subnet (vlan) is under the pfsense. Pleas...

...obfuscate everything possible however if I cannot then will need project to remain in the US only and not with a company - an actual freelancer. Companies wish to keep data about configurations etc. I will only require the XML backup file once working, After we will not hear from each other, and all lab devices will be destroyed to prevent any possible contamination to the production networks. (Yes I mean burned or crushed destroyed) Wifi will be set up so that other nearby homes or someone with a phone and wifi on cannot see that we are test of the component. Optional - The WAP has a 2.5GB capability as does my cable modem if we can make a LAGG or similar trunk group it will please me since I am not taxing the production firewall whatsoever. I do also want to use o...

Project : Dongle Panel Function : web-base hosted VoIP to GSM gateway is accessible from anywhere on any mobile device, it helps to terminate/originate SIP calls traffic using 3G Modems/Dongles and an active USB hub connected with your Linux PC. With the features of exquisite enclosure and high performance, specially designed to maximize cost . Dongle : meaning Huawei usb modem with sim card attached to Freepbx or issable End-User • Same Panel (As Attached Pictures) • Add Call Feature via panel • For all functions I supposed to choose which dongle i need to use . Admin-User • Control All users (Add,delete,rename,change password,list of all users) • Payment method : PayPal & Stripe (2 options will be monthly

I need some with experience in kannel sms gateway to Configure kannel to send modem AT commands for USSD

Hi, I need the configuration of my Kannel gateway with multiple SIM card modem so as to send and receive sms. the modem support AT commands