The term CAD/CAM denotes computer aided design and computer aided manufacturing. It is usually referred to in the context of software tools that perform a wide range of engineering functions. Selecting a proper CAD/CAM system is important to ensure that the stages of conceptualization and final production are under proper control. If you are foraying into computer-aided design and manufacture, you need an expert. There are many freelancers who can do this job for you at a relatively low cost. So, post your CAD/CAM job here and make your life easier! Rekrut CAD/CAM Designers

Filter

Pencarian saya terakhir
Filter menurut:
Anggaran
hingga
hingga
hingga
Jenis
Keahlian
Bahasa
    Pernyataan Pekerjaan
    120 pekerjaan ditemukan, seharga USD
    2D CAD floor plan for a SHOP 6 Hari left
    TERVERIFIKASI

    Hi there, I am after someone CAD help me to draw a 2D shop floor plan in Autocad. Measurement will be provide. Please check out the attached as a reference. Many thx and regards:)

    $69 (Avg Bid)
    $69 Rata-rata
    28 penawaran
    BASEMENT PLAN 6 Hari left

    I WANT TO DEVELOP MY BASEMENT AND LOOKING FOR SOMEONE WHO CAN HELP ME WITH THE DRAWINGS OF THE BASEMENT.

    $101 (Avg Bid)
    $101 Rata-rata
    11 penawaran
    Roller furl 6 Hari left

    My, nearly 50-year-old Roller furl ( a device for handling the front sail ( jib) of a sailboat) has begun to crumble. and needs replacement. It is a perfect candidate for 3D printing, but to have that done, I need a CAD file to give the printer. At this point, I am not sure if it will be less expensive to get it printed or buy a whole new Furler. See photos.

    $366 (Avg Bid)
    $366 Rata-rata
    37 penawaran
    simple project 6 Hari left

    2d plan of AutoCAD with proper layer system.

    $12 (Avg Bid)
    $12 Rata-rata
    51 penawaran

    East Side Clothing in Port Melbourne is looking for a freelance clothing patternmaker to collaborate inhouse on our two brands, Stella(reg) and Estelle(plus) 2-3 days per week. Must have experience with ladies clothing patternmaking. We are a small team based in Port Melbourne, equipped with StyleCAD and inhouse sample room. Position available to start immediately on site in Port Melbourne with th...

    $21 / hr (Avg Bid)
    $21 / hr Rata-rata
    7 penawaran

    Design for Theory of Mechanics & Materials , For the four link Mechanism

    $153 (Avg Bid)
    $153 Rata-rata
    20 penawaran
    Trophy icon Master plan layout 9 Hari left

    Hello, I have a cad file with land extent of 120 Acres. we want to make a master layout with 4000 Sqyards each plot. I need a 2D layout with Area and Dimensions of each plot within the plot name I have attached some examples of works given to me before, I need similar to these Note: Please make sure you maximize 4000 SQYD plots, If not possible in some areas, you can make 2000 Sqyrds or 1000 Sq...

    $133 (Avg Bid)
    $133
    1 entri

    I need a water treatment plant designed on autocad using some notes I have to explain and I also have an example to follow.

    $29 (Avg Bid)
    $29 Rata-rata
    24 penawaran

    I need elvations and site plan.

    $155 (Avg Bid)
    $155 Rata-rata
    17 penawaran

    I need a 2JZGTE Engine Block, Cylinder Head, Valves, Camshafts, Crankshafts, Pistons, Connecting Rods, Connecting Rod Caps, (ETC!!!) You get The Gist, I want the entire Working Engine, Does not have to be Perfectly Scaled to Exact Outer Dimensions. I Will Provide What I have AS References. I do not know the dimensions. I DO NOT Want a lop sided pile of crap that looks good. I want as best as y...

    $422 (Avg Bid)
    $422 Rata-rata
    20 penawaran
    Mechnical Engineer 6 Hari left
    TERVERIFIKASI

    Need a mechanical Engineer for design of a mechanical related task.

    $389 (Avg Bid)
    $389 Rata-rata
    40 penawaran

    I would like to hire the mechanical engineer who can design the inflatable / deflatable balloon which can sense the pressure gradients at the entire balloon surface differentially and then output that information in the 3D fashion, so what part of the balloon surface (e.g right, left, proximal, distal, top, bottom ) have high or low pressures and then able to inject semiliquid into the areas which...

    $490 (Avg Bid)
    $490 Rata-rata
    14 penawaran

    Nos encontramos en búsqueda de Programadores CNC (3 a 5 ejes) con experiencia en CAD-CAM Catia V5 con alto poder de análisis y resolutivo. Nuestra propuesta apunta a programadores freelance para desarrollar programas CAM sobre piezas de gran porte y altos estándares de calidad. Los principales objetivos de la función serán: - Generación de programas CAM s...

    $458 (Avg Bid)
    $458 Rata-rata
    8 penawaran

    I WANT A PERSON WHO KNOWS ABOUT DESIGNING A PROGRAM ( SIMILAR WITH AN ALREADY EXISTING ONE) BUT IMPROVED AND WITH MORE OPPORTUNITIES USING 3D IMAGES ON THE SMILE DESIGN. I WILL NEED TO USE STL FILES, JPEG IMAGES AND 3D FACE SCANS AND BRING THEM ALL TOGETHER IN THE PROGRAM.

    $17 / hr (Avg Bid)
    $17 / hr Rata-rata
    14 penawaran

    Progettista Solidworks..,.......... CAD/CAM Progettazione manifatturiera Ingegneria meccanica Progettazione del prodotto Solidworks

    $354 (Avg Bid)
    $354 Rata-rata
    11 penawaran

    We are a glazing contractor located in Southern California. We fabricate and install Aluminum-Framed Entrances and Storefronts, Glazed Aluminum Curtain Walls, and other misc glass related products. We are looking to outsource Estimating material take-offs, shop drawings, and fabrication drawings. The attached project is a small school with (5) openings utilizing Arcadia AFG7251, 2-1/2 x 7-1/4, T...

    $446 (Avg Bid)
    $446 Rata-rata
    14 penawaran
    3D Print Smooth Simple Plastic Part 6 Hari left
    TERVERIFIKASI

    I have a smooth simple 5 inch plastic part I wanted to 3D print

    $82 (Avg Bid)
    Lokal
    $82 Rata-rata
    19 penawaran

    Convert survey drawing to cad plan

    $89 (Avg Bid)
    $89 Rata-rata
    41 penawaran
    SolidWorks Concrete Tests 5 Hari left
    TERVERIFIKASI

    The attached video clip was supposed to run another 25 seconds or so with the workman pointing out various parts of the "Type B Air Meter," photo attached. I need an animation of the meter zooming in and out at various meter prts with text and arrows identifying the part. This is for a training video. I will provide more detail to the freelancer seleted. Thank You

    $130 (Avg Bid)
    $130 Rata-rata
    34 penawaran

    Existing granny flat, need some architectural drawings and BAS

    $274 (Avg Bid)
    $274 Rata-rata
    35 penawaran

    Model and/or Calculate certain electrical characteristics of a copper wrapped solder column with diameter 0.50mm x 2.2mm long. Output requires following data: 1. DC resistance measured from end to end of the pin. 2. Resistive model (make a schematic) showing resistances in series and parallel. 3. Theoretical maximum current rating of the pin using the dimensions of the copper ribbon as a guideli...

    $467 (Avg Bid)
    $467 Rata-rata
    14 penawaran

    need lateral / load calculations for a beam supporting a covered deck. 4x8 girder below 2x6 floor joists below 2x6 decking floor. with roof over . per ibc 2018

    $179 (Avg Bid)
    $179 Rata-rata
    20 penawaran

    I need an expert engineer that can do complicated drawings

    $548 (Avg Bid)
    $548 Rata-rata
    90 penawaran

    I have gerber files and full BOM for a PCB design project I worked on with another freelancer This freelancer has gone AWOL recently before he could show me how to order samples from the site Should be a relatively quick job for someone that know's what they're doing

    $27 (Avg Bid)
    $27 Rata-rata
    17 penawaran

    COMMERCIAL STEEL FRAMED BUILDING REQUIRES A FLOOR SLAB AT 60M X 40M IN EXTENT DESIGNED TO CARRY RACKING LOADING TO 7.0 METRES HEIGHT

    $3376 (Avg Bid)
    $3376 Rata-rata
    21 penawaran
    98 guibal rd 4 Hari left

    permitted development side extension - extending kitchen out to side of property. Building control needs the following: a block plan, existing and proposed elevations, sections, construction details and a construction specification. Please see attached existing floorplan and a sketch i made of the proposed extension.

    $658 (Avg Bid)
    $658 Rata-rata
    20 penawaran

    We are Empyres Group, a mining and mineral processing company indulged in manufacturing and trading of products like silica sand, red ochre, limestone, dolomite etc. and we are looking for a Plant Engineer for a Silica Sand processing plant.

    $525 (Avg Bid)
    $525 Rata-rata
    2 penawaran
    File conversion 4 Hari left

    I have a 2015 version of VECTORWORKS which will not convert files to DWG to be read by AutoCAD or other CAD programmes. I need a couple simple 2D drawings converted from .VWX to .DWG for the engineer so they do not have to repeat a host of measurements for retaining wall design.

    $14 / hr (Avg Bid)
    $14 / hr Rata-rata
    28 penawaran
    Shop drawings 4 Hari left

    Looking for someone to do the shop drawings in any 3D software on an ongoing basis. Have something ready to go to be done in Solidworks or Inventor. Attached is the drawings and I need the cast in plate to be drawn and supplied. Thanks Vivek

    $42 (Avg Bid)
    $42 Rata-rata
    22 penawaran

    I need local (Seattle, WA or Kent, WA) manufacturing engineers proficient in SolidWorks. We are looking for 1-2 people/consultants to help a client create missing drawings for parts and sub-assemblies. This is a light industrial assembly/manufacturing facility. It would be a mix of onsite/remote delivery.

    $50 / hr (Avg Bid)
    $50 / hr Rata-rata
    3 penawaran

    I need a complete design with electricals of a 300 Ton CNC Press brake machine.

    $936 (Avg Bid)
    $936 Rata-rata
    10 penawaran
    Panel Layout 4 Hari left

    We manufacture panelwork of 120 designs with different connector layouts. we need a cad designer to take a typical drawing and work within our AutoCAD dynamic blocks system to create the designs. We need ongoing help with regular projects so would prefer to find someone for regular work.

    $19 / hr (Avg Bid)
    $19 / hr Rata-rata
    42 penawaran

    I need CAD plans completed for an existing tenancy in Takapuna. This is part of lease deal and the tenant requires these drawings to be provided asap to assist them with their fitout planning. I only have rentable survey area plans on file.

    $42 / hr (Avg Bid)
    $42 / hr Rata-rata
    30 penawaran

    I tried this once before, however the manufacturer need a certain file type. It is a cad file type called a STP file - A three-dimensional object data saved in the Standard for the Exchange of Product Data (STEP) format. Most STEP files are saved with the .stp file extension. The goal is to 3D print these to a 2 foot size using SLS - Selective laser sintering.

    $942 (Avg Bid)
    $942 Rata-rata
    39 penawaran

    Architect design and drawings are needed for 700sqf house addition

    $3401 (Avg Bid)
    $3401 Rata-rata
    26 penawaran

    We are looking for someone to help us in establishing the best cycle time of production of a machined part on CNC machining centers and turning machines For new parts(quotation), and for parts we already produce trying to make the process more efficient if possible. Using Cad/Cam.

    $20 / hr (Avg Bid)
    $20 / hr Rata-rata
    29 penawaran
    MVM Church 4 Hari left
    TERVERIFIKASI

    Our congregation would like to build a sanctuary. We have a member who has a Chief Architect program that is drawing up our floor plans. The building will include restrooms and several classrooms also. We are nearing the point where we will be needing structural drawings.

    $50000 (Avg Bid)
    $50000 Rata-rata
    6 penawaran

    Need a civil engineer to develop plans for Drainage and Grading for two (2) lots in Nampa. Looking to have this done asap.

    $400 (Avg Bid)
    $400 Rata-rata
    15 penawaran
    Enclosure design 4 Hari left
    TERVERIFIKASI

    We have a 3d case design in solid works and we are looking for a cad designer to do some modifications to this case. We would like to add a couple of ports and fan placement, etc. to the case. The dimensions of the case are approximately 45*30*30 cm.

    $301 (Avg Bid)
    $301 Rata-rata
    86 penawaran
    3D Lemon STL 4 Hari left

    A half of Lemon. I need for cnc.

    $27 (Avg Bid)
    $27 Rata-rata
    25 penawaran
    Cell Guide 4 Hari left

    Needing a quote for mechanical dwg of the attached part. Material G10 Use ASME-Y14M (metric dwg) Single dwg with bom shown Std shop & water jet tols

    $50 / hr (Avg Bid)
    $50 / hr Rata-rata
    1 penawaran

    I'm in need of a CAD drawing for a prototype I'm trying to have made. I've attached a picture of something similar. I need the inside diameter to be 2" or a little bigger (it needs to go over a 2" outer diameter pipe). The inside height needs to be 11" and there needs to be a 5/8" hole drilled through both sides 1" from the bottom (not a slit as depicted...

    $80 (Avg Bid)
    $80 Rata-rata
    30 penawaran
    Solidworks model for spine 3 Hari left
    TERVERIFIKASI

    looking for Solidworks expert. I need the model for spine

    $8 - $15 / hr
    Bersegel
    $8 - $15 / hr
    49 penawaran

    2 bathroom gut and renovations - need drawings for permit approvalated in Canada so we need BCIN number if possible

    $308 (Avg Bid)
    $308 Rata-rata
    30 penawaran

    Need 3dmodel of a object. Cad file available but only the surface model needed that in 3d solid model

    $19 (Avg Bid)
    $19 Rata-rata
    22 penawaran
    CAD/CAM designer 3 Hari left

    Looking to have our current designs processed professionally with an interlocking system. No designs will be sent until a confidentiality agreement has been signed.

    $328 (Avg Bid)
    $328 Rata-rata
    52 penawaran

    I want you to design the exterior of my house for me. I already have the floor plans drawn and all I need is the design for the exterior of my house.

    $158 (Avg Bid)
    $158 Rata-rata
    76 penawaran
    Structural drawing templates 3 Hari left
    TERVERIFIKASI

    I'm a Structural Engineer who has recently set up a business. I need a technician to work with - initially to set up drawing/model templates in AutoCAD / Revit but then on an ongoing occasional basis for producing drawings.

    $434 (Avg Bid)
    $434 Rata-rata
    15 penawaran
    2d plans AutoCad -- 2 3 Hari left
    TERVERIFIKASI

    Hey. I need to redraw some drawings from hand drawn to an autocad one. I attach some plans which are hand drawn and then one which is final. I need such quality. I would need 100-200 plans a month.

    $17 / hr (Avg Bid)
    $17 / hr Rata-rata
    153 penawaran
    Ansys CFD Analysis 3 Hari left
    TERVERIFIKASI

    I will need someone to perform a CFD Analysis on 4 different car radiator models - Solidworks file will be provided ( or IGS version ) - Meshing has to be done - Find the most Efficient and Least Efficient car radiator - Explain the outcome of all 4 radiators to me in point form Below are the JPG pictures of the car radiators for your convenience

    $102 (Avg Bid)
    $102 Rata-rata
    26 penawaran

    Artikel Komunitas CAD/CAM Teratas