Delivery Box, check device

$30-250 USD

Ditutup

Dibuat

sekitar 1 tahun yang lalu

$30-250 USD

Dibayar ketika dikirim

In a delivery box, I need a device that can detect if a package has been delivered. The box has a door, and a LED showing red or green. In the box a sensor shall detect the delivered package. If a package is placed in the box, the LED shall light RED and a message shall be send out to a receiver with the device connected to WIFI. The sensor shall have a verification loop, to ensure that a package is present. Working with multilple sensing loops, to ensure that a package is detected. This to ensure that the devise will not send a message, if a hand is triggering the sensor. When the sensor definetely has detected a package, the LED turns RED and a message is send to a defined receiver "Package in the Box". The sensor keeps detecting the package in the box. When the package is removed, the LED turns GREEN. I am asking for a complete project, including hardware and software. The hardware is supposed to be connected to mains supply via a powersupply. The LED are not included in the project. We install these. 12V output for 1 or 2 LED's. A WIFI setup is expected in the project, to be ready to be used with a user setup guide, to define who to receive the message, and with user definition of the message to be received. A proper sensor to detect the package must be delivered. The package is defined and the measure of the package is 12cm high, 8cm wide, 8 cm long. The sensor shall be reliable and only detect this package and must not be disturbed by the sides of the box or by the door to the box. Box size approximately: 30cm x 30cm x 30cm.

Electronics

Arduino

C Programming

Electrical Engineering

Raspberry Pi

ID Proyek: 36565301

Tentang proyek

21 proposal

Proyek remot

Aktif 11 bulan yang lalu

Ingin menghasilkan uang?

Alamat email

Keuntungan menawar di Freelancer

Tentukan anggaran dan garis waktu Anda

Dapatkan bayaran atas pekerjaan Anda

Uraikan proposal Anda

Gratis mendaftar dan menawar pekerjaan

21 freelancer menawar dengan rata-rata $125 USD untuk pekerjaan ini

@umg536

Hi there, I'm bidding on your project "Delivery Box, check device" Being an expert in C, and C++ programming I can do this project for you. please leave a message on my chat so we can discuss the budget and deadline of the project. Also, have a look at my profile for my reviews and portfolios. Thanks Note: This is not an automated bid and i'm ready to discuss your project right now. .. .

$250 USD dalam 6 hari

4,9

(45 ulasan)

7,2

@kazemmojtama

Hello, good time Hope you are doing well I'm expert in MATLAB/Simulink, Python, Java, JavaScript and C++ programming and by strong mathematical and statistical background, have good flexibility for solve your project. I have many experience practical and theoretical in implementation different algorithms (such as: state estimation and Kalman filter, design controller, analysis closed loop stability, signal and systems, signal processing, heuristic optimization, fuzzy logic, neural network and machine/deep learning fields). Evidence of this claim exist in the portfolio. I have read your project description and I can help you (without any plagiarism). Please send me the details of your project. Thanks for attention 100% Jobs Completed, 100% On Budget, 100% On Time

$250 USD dalam 7 hari

5,0

(14 ulasan)

6,5

@macroenergy

Hello, my name is Metin and I'm excited to introduce you to Delivery Box, a project that requires a device that can detect if a package has been delivered. With the help of a sensor, the device will light up red if a package is placed inside the box and send out a message to a defined receiver. I am a seasoned freelancer with over 15 years of experience in electronics, engineering, software and system simulation. I have worked on projects related to motor control, analog design, RF transmission and reception, low power distribution and more. My skillset includes Arduino development, C programming and electrical engineering which will be invaluable for understanding the project requirements and designing the required hardware components. Furthermore, I provide thorough quality assurance during all stages of project delivery so that you can be confident in my workmanship. If you're looking for a talented professional who can deliver an exceptional project on time and budget please let me know how I can help!

$84 USD dalam 7 hari

4,8

(82 ulasan)

6,8

@Engrusman877

Hi There, How you want to implement this, some info still needs to be clear. Do you need to detect/scan parcel presence in a box or use a barcode-type scanner? I am a senior Expert and Have more than 5 years of experience in electronics and embedded design. Just check my profile and share your details. Time and Budget will be discussed. Thanks

$140 USD dalam 7 hari

4,8

(99 ulasan)

6,3

@alilakho8

Hello Dear Employer, I am Ali, an Electronic Engineer with experience in Embedded Systems and IoT. I have designed similar project before using ESP32 to detect the parcel and send a notification to the owner. I can design this complete device for you. Please chat to discuss more. Thanks

$250 USD dalam 3 hari

5,0

(43 ulasan)

6,0

@Adeel2k14

I am Muhammad Adeel, an electrical engineer with expertise in solving electrical problems. I have a lot of experience in designing electronic circuit and PCB boards using tools such as Proteus, Eagle and Altium. I understand that you are looking for a device that can detect if a package has been delivered and the sensor should have a verification loop to ensure that a package is present when needed. Working with multiple sensing loops ensures that a package is detected even when hands are triggering the sensor. My skillset includes Arduino, C Programming and Electronics which makes me the perfect fit for this project. My deep knowledge of electronics will be an asset to you in designing the device required to meet your needs. Additionally, I am well aware of the need for reliability when it comes to sensor detection - only 12cm high packages should be able to trigger the sensor so it doesn't get disturbed by sides of the box or by door opening/closing during its runtime.

$30 USD dalam 7 hari

4,8

(39 ulasan)

5,7

@HarimohanG

Best Detect Device Expert! ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Dear Client, I am excited to propose a solution for your Delivery Box project. With my 30 years of experience in electronics design, circuit design, and PCB design, I am confident in providing a reliable and efficient solution. ✅My proposal includes a custom sensor designed to detect the package dimensions you provided, with a verification loop to ensure accurate detection. ✅The sensor will trigger the LED to turn RED and send a message via WIFI to a designated receiver when a package is detected. The device will continue to monitor the package and the LED will turn GREEN once the package is removed. ✅The hardware will be designed to be connected to mains supply via a power supply and will include a user setup guide for WIFI connectivity and message customization. ✅The project will include both hardware and software components, ensuring a complete and functional solution. I look forward to working with you on this project! Please check out my profile for more details: https://www.freelancer.in/u/HarimohanG ⭐ ⭐ ⭐ ⭐ ⭐ ⭐⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, Detect Device, LED, WIFI Delivery Box, Sensor, Delivery Box etc. I will provide: 1. 24X7 Live support 2. On Time delivery 3. 100% Satisfaction Thank you for considering my proposal. I look forward to discussing this project with you further. Best Regards Hari Mohan

$140 USD dalam 2 hari

5,0

(3 ulasan)

4,8

@devbaloni1983

Hi, I have more then 15 year’ experienced in Development. As i am expert, I can build it according to your requirements. Because I have a lot of the experiences about these fields, I can build your project as soon as possible perfectly. I offer excellent software quality work and provide the best support on your project. If you give me this job, I will do my best to finish your job until your timeline. If you want to see my past works, I can show you my past works right now. Ready to discuss with you about the task now. Thank you for the reading.

$100 USD dalam 7 hari

5,0

(3 ulasan)

3,8

@assignsolver

I have read and understood all your project details "Delivery Box, check device" and I feel my self the best candidate to complete this project with 100 percent accuracy. I have vast amount of experience in this industry since I am working from 2009 as a professional writer. I have huge number of client base in these 12 years. I can write Articles, Blogs, Website Content, CV, Business Plans, Books & eBooks and Product Descriptions. I provide Supreme Quality Work against very low prices even in short deadlines. You may contact me anytime so we can discuss your project in detail. Thank You.

$30 USD dalam 1 hari

4,6

(12 ulasan)

4,0

@Aravindsanjuoo7

I can design a sma device with a battery pack which consists of 3 sensor and cover the maximum areas in length or in breath to detect the package and check at a particular intervel of time and send mail notification to you so that u can able to collect the package when its kept in the mail box. Of u need a indicator i will use rgb led to show the status by its colour i will use esp32 as it have wifi features

$120 USD dalam 7 hari

5,0

(4 ulasan)

3,8

@toplinesolutions

I have read and understood the details of this project "Delivery Box, check device". I am a Highly-Qualified & Skilled ACADEMIC WRITER with more than 10-Years of experience. In last 10 years, I have served more than 2,500 clients and achieved 98% satisfaction ratio of my clients who have scored more than 90% in all their subjects which were handled by me. I strongly believe in customer satisfaction and this is the key factor of my success and I provide a service that gives quality outcome to my clients. I am professionally able to write; Essays, Summaries & Blurbs, Discussions & Replies, Dissertation & Thesis, Lab Reports, and Research & Report Writing. I assure that I will provide plagiarism-free work, also as evidence I will provide you free Turnitin reports. I am familiar with all references and formatting styles; "APA" "MLA" "Harvard" "Chicago" "IEEE" "OSCOLA" and "Vancouver". In order to talk with me, please click on “CHAT” button so we can finalize the deal. Thank You

$30 USD dalam 1 hari

5,0

(4 ulasan)

2,2

@Techalchemy

Hello, I have read your project requirements and then I am sure I can complete that project. I can help you. please get in touch. Thank you

$140 USD dalam 7 hari

5,0

(3 ulasan)

2,3

@NimeshSandeepana

Hi. I am an electronic and electrical engineer and am currently working for an EDA company. I have experience in C/C++ programming and Verilog/VHDL/SystemC HDL. Also, I have experience with Arduino, STM32, and ATtiny microcontrollers. Also, I have experience with ESP WiFi modules and Bluetooth modules such as the HC 05/06. As an electronic engineer, I have experience with lots of sensors. Also, I know communication protocols such as UDP, TCP. If you check my profile, you can see that I have not been working as a freelancer for some time. because I stopped working here due to my other work. Now I am starting again as a freelancer. I could help you with this project. Good day, sir. Also, The price can be negotiated.

$56 USD dalam 7 hari

5,0

(2 ulasan)

1,6

@FineIdeas

✦◼️✦ "Full-5 Stars Rating✦◼️✦ - ✦100% Marks Guaranteed!✦ I have 9+ years of experience in managing academic writing jobs successfully. I have done my Master's in English Literature, but I have worked with clients completing their tasks for different subjects such as; English Literature, Social Sciences, Finance, Economics, Medical, as well as, Nursing. I have prepared myself all of these professional years to be a multi-tasker, who can help you to get out of trouble for any type of assignment. I always provide my clients with High-Quality Solutions at very REASONABLE PRICES even with SHORT DEADLINES. I can help you with; Case Studies, Research Essays, Online Exams, Quizzes, Summaries, Reports Dissertations ETC. I provide FREE Turnitin reports and countless revisions facility to fully satisfy my clients. and "I PROMISE you with 100% SUCCESS". For samples, visit my profile: https://www.freelancer.com/u/FineIdeas

$30 USD dalam 1 hari

5,0

(1 ulasan)

1,0

@programmingacer

I'm excited to hear about your project for delivery box and device! With over 20 years of experience in the IT field, I am confident that I can deliver the best solution for your needs. My team and I specialize in developing robust solutions that can withstand the test of time. We specialize in delivering complete projects with hardware and software, as well as with a setup guide for use with the WIFI device. We have experience working with multiple sensing loops to ensure accurate detection of the package in the box. Additionally, our sensors are reliable and only detect this package at 12cm high, 8cm wide, 8cm long. We are confident that our expertise can help you achieve success on this project. Please feel free to contact us if you would like more information or any other questions regarding our services or this project specifically. We look forward to hearing from you soon!

$200 USD dalam 3 hari

5,0

(1 ulasan)

0,6

@GraphicFuture93

Hello there! I am an i-tech-art, an Indian-based Graphic Designer. I understand that you are looking for someone to create a delivery box that can detect if a package has been delivered. With my extensive experience in graphic design and software development, I am confident that I am the best fit for this project. I have worked on numerous projects related to delivery boxes before and have perfected the art of making them reliable while still being easy to use. My services include 2D-3D logo design, menu design, banner design, poster, flyer design and brochure/catalog design among others. Additionally, I offer unlimited revision until you are satisfied along with an advance payment release facility if needed. I look forward to hearing more about this project and helping you bring your vision to life! Please feel free to contact me if you have any additional questions or would like me to provide any additional information about my services.

$30 USD dalam 1 hari

1,0

(1 ulasan)

1,7

@hashirqureshi01

I understand that you are looking for a device that can detect if a package has been delivered. You need this feature for your project, and I believe I am the best fit for this job. My skills include knowledge of Arduino and Raspberry Pi, which would be necessary for this project. Additionally, I have experience in data science and python which would be useful in creating the necessary hardware and software. Additionally, I offer free consultation service about your startup idea as well as dedicated support during the project's development. I believe my combination of skills, experience and commitment make me the perfect choice for this project. Please let me know if you would like me to discuss further or answer any other questions about my candidacy?

$200 USD dalam 7 hari

0,0

(0 ulasan)

0,0

@HelpingDoor

I have read and understood all your project details "Delivery Box, check device" and I feel my self the best candidate to complete this project with 100 percent accuracy. I am a Highly-Skilled Mathematician and Engineer who can help you to solve all your problems with 100% accuracy. I have a super grip on both niches as I have completed Ph.D. in Mathematics and Engineering. I have more than 5 years of experience in managing academic tasks related to Mathematics & Engineering with an A+ grade. I can help you with; High Power Electronics, Communication Systems, Engineering Problems, Power Engineering, Thermodynamics, LENIAR ALGEBRA, DISCRETE STRUCTURES, DISCRETE, and TRIGONOMETRY. I also have a super grip on various software, such as; LabView, Matlab, Simulink, Multisim, LtSpice, Proteus, and Altium. Please message me, I am waiting for your response.

$30 USD dalam 1 hari

0,0

(0 ulasan)

0,6

@fayyazs789

Hello hj62, I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Delivery Box, check device plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

$200 USD dalam 5 hari

0,0

(0 ulasan)

0,0

@rafgonzalez

Hello there! My name is Rafael and I am an Electronics & Electrical engineer/Mechanical Engineer/Product Designer with 10+ years of experience. I understand that you are looking for a device that can detect if a package has been delivered and if so, turn on an LED to indicate this to a receiver with WIFI connectivity. Specifically, you need a sensor that can detect a package 12cm high, 8cm wide and 8cm long. You also want this sensor to be reliable so it doesn't light up when the side or door to the box is triggered. I believe I am the perfect person for this project! With my extensive background in electronics, mechanical engineering and product design, I have the skills necessary to complete this project from start to finish. Plus I'm an end-to-end solutions provider who can provide you with consultation services, reverse engineering, improving existing products as well as coming up with completely new products. If you award me the project, I’d be pleased to discuss this further and get started for you as soon as possible. Best regards!

$100 USD dalam 2 hari