Using PCam 5C camera from Ubuntu on Digilent ZYBO Z7-20 CPU+FPGA board
$30-250 USD
Dibatalkan
Dibuat hampir 6 tahun yang lalu
$30-250 USD
Dibayar ketika dikirim
Please solve my problem, please teach the solution method and deliver the project file.
This project is relevant to FPGA, Ubuntu.
My problem is the following.
===========================
I want to get image from Pcam 5C from Ubuntu running on ZYBO-Z7-20.
First, I cloned this repository,([login to view URL]) and tested pre-built image. I could get camera image by command-line.
Next, To use ubuntu, I changed the configuration and built petalinux project.
$ petalinux-config
Linux Components Selection -> u-boot -> u-boot-plnx
Linux Components Selection -> linux-kernel -> linux-xlnx
Image Packaging Configuration -> Root filesystem type -> SD card
And I modified project-spec/meta-user/recipes-bsp/device-tree/files/[login to view URL] as described in README.md.
After change the configuration, I created kernel image file and copy them to the first partition of SD card.([login to view URL], [login to view URL]).
$petalinux-build -c kernel
$petalinux-build -c u-boot
$petalinux-build -c fsbl
$petalinux-package --boot --fsbl images/linux/[login to view URL] --fpga images/linux/[login to view URL] --u-boot --force
I downloaded ubuntu rootfs [login to view URL] from here([login to view URL])
And copy them to the second partition of SD card.
Ubuntu was successfully booted, and I tested command to get image. But I couldn't get image from pcam.
media-ctl -d /dev/media0 -V '"ov5640 2-003c":0 [fmt:UYVY/'"$width"x"$height"'@1/'"$rate"' field:none]'
media-ctl -d /dev/media0 -V '"43c60000.mipi_csi2_rx_subsystem":0 [fmt:UYVY/'"$width"x"$height"' field:none]'
When I run this command, the following error is occurred.
failed to enumerate /dev/media0 (-2)
When I run v4l2-ctl -d /dev/video0 --info command, it seemed that I got camera information correctly.
But /dev/media0 is missing. /dev/video0 is appeared.
Why /dev/media0 is missing?
Got any ideas on how to fix this?