AutoCAD and Revit tecnicians required

Hi there Killian, being a civil engineer with over 5years experience using computer aided software like Revit Architecture and AutoCad, I feel I'm an ideal candidate for the position you are advertising. I have a great command of English and I truly believe that communication wouldn't be a problem. I use a 4G connection here with high connection speeds and I'm in a timezone similar to yours (+\- an hour) I charge an average hourly rate of $25/hr which in my opinion is very competitive. I look forward to hearing from you. Thanks

Hi ! Your project is of much interest to me and I would be pleased to do it. During my work, I will provide the ultimate revisions and make all the necessary changes upon request until you are completely satisfied. Best regards, Valentin P.S. My typical hourly rate is £ 12 per hour.

Hello I found your job post and I’m very interested in your project. As a professional highly qualified project designer I think you’ll find I have the skills you‘re looking for. I can guarantee I will apply all my experise and experience in the aim of successfully completing Your task and requirements. I have aquired high level skill in using AutoCAD and 3DS Max. I have 7 years of experience in Autocad, 3DS Max 2D and 3D drawings. Please take a look at my portofolio to get an idea of the kind of projects I have developed. Typically, I can create and design a project like yours very quickly. I am available to start right now. I really believe I could achieve high level results in the area required by your project. If you find it necessary, I’m open to a live interview to furtherly discuss my qualifications or specific needs of your projects. I really hope we can accomplish successful cooperation in our joint projects. I can provide a high quality job in a quick time. Thank you for your consideration. Milan Iskrenov Master of architecture

****kindly read ***We can design it so easily ,we are engineers ,...Won "PREFERED FREELANCER" Just Check Our Portfolio for 100% Best Work >> https://www.freelancer.com/u/mahmoud0khaled.html We Can Provide High Quality and various designs,We Are Waiting Your Kind "Message" FAST Response ....

Hello, not to repeat myself. Your work will be done as you expect it! We are competent, accurate, we answer with fast turnarounds & professionally done work. And also, we're recently new on this site, so we would like to prove to you what we know! Please check the examples of our work on our Freelancer page: https://www.freelancer.com/u/crtvisuals2.html Let’s discuss!

Dear Mr or Mrs, We are team of civil engineers and architect and we are working proffesional in Autocad and Sketch up. We have a lot of examples of our previos work and we are avalible for communication while work. For any further questions, contact us, We are looking for partnership also, About the houry rate, its 10-15$, we can deal it if you have more work, we can deal it Sincerely, Team, ViktorPap

Hello, I am an experienced architect and Interior Designer with international work exposure. I am practicing as professional architect for over 30 years. I have designed number of buildings and had overseen their construction. I have about 1000 hrs. online job experience as a freelancer. I have been using AutoCAD for last 15 years and quite proficient about all aspects of it. I have also extensively worked with Revit and 3DMax for 5 years. I possess required skill set and right attitude for handling this job. I will honor all the commitments made to you and strictly adhere to the time line set by you. Moreover, the hourly rate that I charge is quite economical. Highlights of my work at Freelancer, Upwork and other online work in brief: 1-FULL PROJECT DRAWINGS, DOCUMENTATION & 3D MODELLING IN REVIT. (10 HOUSES IN AUSTRALIA, 2 in USA) 2-REDEVELOPMENT OF NURSING HOME BUILDING INTO 12 HOUSES USING REVIT & AUTOCAD. (U.K.) 3-SHOP DRAWINGS WITH BOQ IN AUTOCAD. (1 PROJECT EACH IN USA & CANADA) 4-INTERIOR DESIGN & LAYOUTS IN AUTOCAD. (1 PROJECT EACH IN USA & AUSTRALIA) 5-MANY PROJECTS INVOLVING PDF/JPG TO AUTOCAD DWG. 6-Pointcloud to Revit Model (1 project in U.K.) I have graduated from one of finest institute from India. I'm available to speak with you via Skype I hope you will consider me seriously for this job. Sincerely, Ram Raverkar

I am engineer with experience with technical drawings in autocad and revit , I am looking for freelance works to increase my portfolio and work from home. I can do a good price for the project since I am more interested in adding experience and good reputation on this site. I have a good internet connection, phone line, all kind of application for communication and also good equipment to work with. I can also adapt my work hours to your time zone. I put 10 days for 250,00 GBP working up to 50h, but I can I lot of work in 50h. I am looking forward to hear from you. Regards Juliana Cabral

Dear Client. I am an Architect and have over 10 years experience in designing buildings and Interiors as well as any form of Graphic Designing Please note that I have all the knowledge and skill to take up and complete your respective work/ project to the specs you are looking for. I have just a few star rating on www. freelancer.com as I am new here. However as  an Architect, Interior and Graphic  Designer  I have been practicing  successfully for the past 15 years. If shown your trust I will deliver with full responsibiltiy, conviction and to your expected standards. Hoping for a positive reply to me  as your choice for this project. Regards Alden Pereira Architect, Interior and Graphic Designer.

Dear Sir, I am civil - structural engineer with extensive experience in drafting and detailing. I'm using AutoCad and Revit in advanced level. Most of my work is based on structural drafting and detailing, but I created some Revit families for furniture too. I would be glade to join your team and to work for you. My fee per hour in $10-20. Regards, Tanja

I'm a certified Revit Professional I'm a Civil Structural Engineer I worked as an Instructor for Authorized Autodesk Center for two years I have a great experience dealing with Revit & BIM in both modeling and detailing ,Architecture & structure I'm currently working as a BIM engineer at one of the largest projects in middle east. I have done many projects in USA,Canada&Australia

I guarantee experience and quality of work, and, with over 6 years of office experience, autocad design and drafting works are something I have been doing up to now and what I best specialize in. My typical houly rate would be £8 per hour.

Hi There, I'm a Mechanical Engineer familiar with Microsoft Word, Microsoft Excel Google docs Spreadsheet, Wordpress, Magneto Hourly rate15 Pounds per hour I Provide certain services : 1. Data Entry 2. Web Research 3. Social Media Marketing 4. Mechanical Engineering 5. Autocad 6. Sketchup 7. Interior Design & Building Architecture 8. CorelDraw & Photoshop I've enough experience about various types of Data Entry, Web Research, Social Media Marketing, Autocad Experience, Building Architecture I want to build my career as a successful Freelancer. Please, let me know what is needed to secure this bid! Thank you for your consideration Murad Eltaher

I am Ishwarya V.T , I have done master in Infrastructure Design & Management from Indian premier college. I have 5 years of experience. I have worked the field of Roads ( Geometric Design, Intersection Design, Quantity Take-off), Utilities ( Storm water, Sewage water, Garbage, water) , Railways ( Geometric design of alignment, preliminary alignment ) & Land development projects (Grading, Cut/fill quantities). I have done all the projects in Autocad civil 3D for both design and modeling which I have been using right from the beginning of my career. The output I have produced are 3D model, Plan-profile drawings, Section drawings, grading plans, Set-out drawings,Cut/fill volume etc. I have worked with reputed Clients like Mouchel ( Abudabi) , AF (Sweden), Indian Govt. Organizations as part of my regular job. I am available for 4 hrs on weekdays and full time on weekends. I have completed one project and second project for the same client is near completion. I would like to know the scope of the work.I promise quality and timely completion.

Hi. My name is Nikolay and I have big experience in engineering, designing, modeling, calculations, constructing etc. for oil, gas, chemical, building, manufacturing and other industries. Usually, I work with Autocad or Solidworks. Everything will be done quickly and efficiently. I will do my best for you.

i am well schooled in auto CAD and revit architecture. and i believe i will be a good fit for this job. my hourly time would be 2hrs every day.

A proposal has not yet been provided

Hello if you require any electrical control panel design, PLC / HMI / SCADA design I can assist you with that

Hello Killian, I found your job posting and I think I'd be a great candidate for the position. I have 26yrs. of experience as a CAD designer. I am very proficient with CAD software, residential design including construction and structural drawings for statutory approval. Over the years I have developed a sound reputation for delivering on schedule, being flexible, understanding and adhering to directions with minimal re-work. Based on your job brief I propose an hourly rate of £20/hr. I'd love to talk to you further, I look forward to hearing from you Adrian Hedley

A proposal has not yet been provided