Zwave xbeePekerjaan

The primary aim of my project is to implement monitoring and control functionalities using an Xbee Raspberry Pi. The focus is primarily on remote measurements, with an emphasis on digital I/O. Key requirements: - Ability to acquire data remotely and transmit it accurately - Special attention to digital I/O measurements Skills and Experience: - Proficiency with Xbee Raspberry Pi is crucial - Ability to interpret digital signals effectively - Prior experience in setting up remote monitoring systems is preferred. Raspbery pi with touch screen and remote node control through xbee

order Task title Task description Estimation hr 1 Configure VS Code Configure new solution on Visual Studio Code, make Github Repository 1 2 dmxinput Configure DMX512 input, take come channels, and make it ready to enqueue. 1 3 Input Queue Make sctucture, start queue, enqueue and deuqeue functions. 2 4 xBee send only show_package function. 0.5 5 xBee receive only a hardcode enqueue generation to test the queue 0.5 6 dequeue admin start thread, deque to selected output 0.5 7 dmxoutput send dmx output 0.5

Developing a CanSat I acquire data through two modules (GY-91, GPS NEO 6M and at the same time Arduino Nano) and send them to my PC using XBee S2C. I need an HMI that shows the data from the GY-91 which are pressure, temperature, altitude, accelerometer data in X, Y and Z and from GPS the latitude and longitude. The data is received by the XBee in hexadecimal and on the HMI I would like the pressure, temperature and accelerometer data to also be displayed in graphs.

i need to configure two xbees pro (zigbee protocol) foy any of those xbees to be able to transmit and receive. I need to use 2 raspberry pi4 and plug an xbee on each one. the idea is to transmit data between the xbee and have an LCD screen on the pi4 in order to see that the message its been transmitted successfully and be able to use the other pi to answer the message. I was thinking also to transmit a picture not sure if possible.

...project that involves controlling a 1-meter RGB LED strip, creating & communicating via a wireless mesh network using Arduino Nano V3.0 ATmega328P & XBee modules. I need someone to guide me in setting up a mesh network with multiple nodes - a maximum of 12 or 16 nodes. I will do the doing - but I need your instruction as a tutor & to teach me how it's done. The ideal candidate should understand Arduino Uno & Nano boards, XBee modules, WS2812B or NeoPixel RGB LED strips, & Bluetooth or Wi-Fi modules. Responsibilities: Guide the development & implementation of a reliable & secure wireless communication system between Arduinos & cell phones using XBee modules. I am still determining whether the project requires the development of ...

Silakan Daftar atau Login tuntuk melihat rincian.

Arduino Drag Race 2 Partes (Salida y Meta) Salida Hay que controlar 2 carriles, derecho e izquierdo, por lo que será todo por duplicado. Llamada a linea de salida con un interrup...recorrido Con el tiempo de P12 y P13 mas la distancia que hay entre ambos obtendremos la velocidad alcanzada al final de la prueba. Necesitamos enviar los pulsos o los datos recogidos a una distancia de 500m. Si conseguimos enviar los pulsos al arduino de salida solo usamos un arduino. La otra opción es con un arduino en meta y que envíe de alguna forma los datos por wifi, internet... He visto módulos XBEE, en principio es en linea recta y sin obstáculos Podría poner algun módulo de enlace en medio del recorrido. Tienes una explicación en sobre e...

We have trademarked the name Vagicadabra, a vaginal sexual health treatment for women! We need a logo created for this trademarked treatment! This treatment will use PRP injections, Zimmer Zwave, and Phoenix CO2 RejuVAnate device. I mentioned these in case you want to use a "wand" or something creative in the logo! You don't have to, but I don't want to limit anyone's imagination!!

...image. 1 - Verify if the chip ESP32 is still the best option available in the market (cost/benefit) (We need to connect in AWS IotCore); 2 - Review the celullar conection chip. Before we were using SIM868 but now we need to upgrage to 3G/4G modules once 2G is phasing out; 3 - Review the satellite module option to check if there is a module with better coverage than Globalstar; 4 - We need to add a Xbee or Zigbee receiver once I want to add wireless sensors on this module in future. So this main board needs to be ready to read temperature/humidity from wireless sensors. (The wireless sensor design will also be needed in future). After reviewing the design the needed scope of the job will be the following: 1 - Develop schematics and BOM for main boards and the optional modules ...

...reading, open/close valve, start/stop pump, ping device to check if it's online) and then via mobile app UI interactions, commands are sent to the Gateway (via Web API) before being broadcasted by the Gateway on the farm so the intended device receives this instruction *** TECHNICAL SPECIFICATIONS *** - Hardware components: ESP32 + Digi XBee 3 PRO (2.4 Ghz Zigbee 3.0) - Device communication: Bluetooth (Device setup), WiFi (WAN telemetry), ZigBee v3/Xbee (mesh network), MQTT/JSON - Development/programming requirements: C programming (required), Arduino IDE (desirable), experience with GraphQL (Web API endpoint), AWS IoT (MQTT broker) *** ADDITIONAL PROJECT DETAILS *** - Refer to our Request for Quote for more detailed information regarding this firmware project, ...

Hola necesito una persona que cumpla las siguientes caracteristicas: Programador esp32 con conocimientos en c++ Especialista en iot Conocimientos de mqtt Programador de backend + frontend para mostrar los datos en web. Programador de app en android conectada con el backend.

Excellent fluent English and communication skills are required. Not looking for a team, This app will be controlling a 750 pound robot. No offline work can be done. At least 5 years of native Android development experience Must have experience with BLE on devices, XBEE experience would be beneficial Local and syncing database experience required. Must have experience working with Git for source control Any previous work with microcontrollers like Arduino is a plus Must be proficient with the English language and be easy to understand Any experience developing hybrid applications with Ionic or Xamarin a plus.

ESP32 based embedded controller firmware development with WiFi, Bluetooth, Ethernet, RS485 & Modbus Another project involves Zwave with Arm Cortex M33

... I wanted to understand more about the hardware and firmware used to build a Z-wave network. I already have a PCB board designed for manufacturing but this needs another, better version of the board and I'll need to understand if my objectives with this board are possible. My goal is to understand and create a PCB using ESP32 chip acting as the brain, allowing me to program attached zigbee and zwave chips that will broadcast signal, connect to respective devices, send and receive commands from those devices. Also onboard the ESP32 which has wifi and BLE integrated allowing me to send and receive those messages/commands to the Cloud. The only aspect I'd like to focus on here though is the full PCB integration of ESP32 and those chips, if something like this is possible, ...

... I wanted to understand more about the hardware and firmware used to build a Z-wave network. I already have a PCB board designed for manufacturing but this needs another, better version of the board and I'll need to understand if my objectives with this board are possible. My goal is to understand and create a PCB using ESP32 chip acting as the brain, allowing me to program attached zigbee and zwave chips that will broadcast signal, connect to respective devices, send and receive commands from those devices. Also onboard the ESP32 which has wifi and BLE integrated allowing me to send and receive those messages/commands to the Cloud. The only aspect I'd like to focus on here though is the full PCB integration of ESP32 and those chips, if something like this is possible, ...

...multi-threading • Software architecture layout • Experience with Linux C++ and C Libraries • Able to develop REST protocol technologies • Work on different protocols like SPI, SDIO and others. • Having knowledge about Embedded systems • Working on high/low-level product designs &; roadmaps along with a team of ace developers. • Good proficiency in Python, C++, Java. • Exposure to protocols like Zwave, KNX, SIP, VOIP, etc, would be appreciated. • Knowledge of tools like GNUMake, CMake, etc. • Yocto Project • Basic knowledge of Linux kernel, device drivers would be good plus. • Collaborating with the rest of the engineering team to design and deploy the code to test/production environment. • Debug, validate, revie...

...The script will loop and input the data until no more data to be read/received. Here is the code sample : from import XBeeDevice # TODO: Replace with the serial port where your local module is connected to. PORT = "COM1" # TODO: Replace with the baud rate of your local module. BAUD_RATE = 9600 def main(): print(" +-----------------------------------------+") print(" | XBee Python Library Receive Data Sample |") print(" +-----------------------------------------+n") device = XBeeDevice(PORT, BAUD_RATE) try: () def data_receive_callback(xbee_message): print("From %s >> %s" % (xbee_message.remote_device.get_64bit_addr(), ())) ...

...start slow and see how you work in our environment. You will be remoting into our system, and using remote debugging tools. This is part of a larger project that uses a tablet via bluetooth, that connects to a gateway via XBEE to control a 3 axis robot. You can see details at We will ask technical questions right away to determine your background for this project, This is our custom board and you will have to work remotely with the board. We have developed a new "transceiver" board based on the NRF52840 chip that utilizes both bluetooth and XBee communication. Half of this board's function will be to take some features from our existing "Gateway" board that we already use in production and act as a transmitter, sending commands to our other uni...

Looking to upgrade App from sdk 2.0 to 3.0 and to add additional zwave devices. What is the brand: VITRUM What is/are the device(s)/service for type: The Vitrum Wall Switch APP seems to be Abandoned no response from developer. I’m looking to have the APP Upgraded to SDK v.3 and have the Shutter Models added: What kind of category/signal(s) would the app use: Z-Wave; Is there an (public) API / documentation / manual(s) or known (other) implementations (like Blogs/Github etc)? GitHub GitHub - MakeSimpleOrg/ Contribute to MakeSimpleOrg/ development by creating an account on GitHub. Are you willing to loan or donate to a developer? Yes, donate money €/$/£ Extra information:

Implementation and testing of data fusion algorithms in wireless sensor networks. - Implement: Wireless network algorithms with LoRa protocol, ZigBee proto...a base station through the LoRa protocol, a node that transmits data to a base station through the ZigBee protocol, and a node that transmits data to a base station through the Enhanced ShockBurst protocol will be implemented. - The LoRa node will be based on the Arduino MKR WAN 1310 transceiver development board, the ZigBee node will be based on the Arduino Nano Every development board and the XBEE transceiver and the ShockBurst node will be based on the Arduino Pro Mini development board and the nrf24L01 + transceiver. The implemented data fusion algorithms will be compared in terms of the energy efficiency they have on ...

Configure the Base station and Rover with heading using LORA and xBEE for RTCM correction. Previous experience is Must. Guide us to get Proper Hardware and software solution to achieve Centimeter Accuracy on rover with atleast 3 to 5 Mile open space.

I need to develop the zigbee mesh device using Xbee module for home automation system. I want to work with engineers who has experience about this fields. I worked with previous engineer by now. But he did not finished it. If necessary, you can build the system from the scratch.

I need a basestation made with a cellular module, or a cellular module, or a satellite module itll also have a xbee network as an data input.

I am looking for a developer to work with that has experience building mobile apps for home automation. We are looking for someone that has experience with Z-Wave and Zigbee devices. If you have built an app that works with Zwave devices and can send me a link to it, that would be helpful. I would also look at any hub or cloud service to make this possible. Our app is currently written in flutter/dart but that is not a requirement. We can work around this if you do not know dart/flutter. I am looking for someone with experience. You MUST have experience with Z-Wave. With this project, all we want to do is a proof of concept. I want a mobile app with a button on it that when pressed will turn on a Z-Wave light bulb.

Need IOT platform for device control in the home for end user devices zwave + Zigbee + wifi devices Must have previous experience with a platform and must show workings. Opensource is important

We want a script to be developed in python as to include below function: Step. 1. Read Data from serial and print 2. Generate .csv file and save it 3. Save the data in .csv file 4. Open saved .csv file and ...per the two-column format 7. Read data from serial port and write in .csv file 8. Open latest .csv file and read it 9. Convert the data read from .csv file to format required as per API of server 10. Complete package of the data format with table name and server API 11. Send the data package to server 12. Move the completed .csv file to Done folder 13. Read the XBee data package from serial port 14. Break the data received from XBee to save in .csv file 15. Convert this script in an Python based application 16. Build application layer communication from this application...

I have existing arduino code (see attached) where a universal master sends data starting a LED sequence/signal to multiple slaves in a mesh network using XBEE 2.4Ghz S1 modules. I want to replace the "button push" instance with a gesture sensor instance, where any gesture = "LEFT" or gesture = "RIGHT" will replace the function of the "button push" that's currently in my code. Gesture ( LEFT & RIGHT) will initiate sending the data instead of the button. I do not want to use UP/DOWN only LEFT/RIGHT for now. Arduino model = nano v3 Gesture sensor = Gowoops APDS-9960 Hand Gesture Sensor 3.3v XBEE = 2.4Ghz XBEE S1 Please provide the following: - validated code (I can also test with my units) - new schematic I am somewhat ...

Saya ingin membuat sketch program arduino ide agar dapat mengambil data dari si Xbee. Saya sedang melakukan penelitian dengan judul sistem keamanan gedung wireless sensor network dengan teknologi zigbee. Yang dimana menggunakan dua buah node sensor yang terdiri dari sensor LM35 dan MQ-2. Jadi 2 buah Xbee Router/end device dan 1 buah Xbee Coordinator. Berikut saya lampirkan diagram bloknya dan contoh sketch program arduinonya :

Buscamos programadores para crear API Y SDK.// We are looking for programmers to create API AND SDK. Somos una C...SDK ABIERTAS// OPEN API and SDK API abierta, compatible con MQTT, HTTP, TCP, UDP, UTP, plataforma de nube privada para una conexión sencilla con los clientes // Open API, compatible with MQTT, HTTP, TCP, UDP, UTP, private cloud platform for easy connection with clients Los links para ampliar información son// The links for further information are:: Presupuesto desde// Budget from: 500 € a convenir// € 500 to be agreed Puede ser idioma inglés y español. // It can be English and Spanish language. Contacto // Contact: Sara

I would like a simple code, where a Nuget packed can be used, to configure Xbee S3B radio parameter (Network ID) through the serial port.

I need an Embedded Engineer from Pakistan. Must Know about ESP32, Arduino, STM32, ESP8622, Xbee, Lora etc.

...experienced in Hardware Design as well as creative in designing your project using Arduino, Raspberry Pi, Stm32, Esp32, Esp8266, NodeMCU, and LoraWan based controllers. Also teach you everything about how it works in a proper documented manner. Develop firmware for the above controller, debug and improve as required. Few sensors or hardware knowlegde required Wireless module (NRF, Bluetooth, wifi, XBee, GSM) Lora with gateway and complete integration on TTN Heath monitoring sensors (heart rate, EMG, ECG, etc) RFID, fingerprint sensor All Sheilds of Arduino, esp, raspberry pi and stm32 Ultrasonic, PIR, lux, LDR, GPS, SIM800, SIM900, GAS SENSOR, PHOTORESISTOR, DHT11, DHT22, MATRIX KEYPAD, CAMERA, MPU6050, ADXL335, RELAYS Motors Encoders Switch and buzzer Led matrix, seven-segme...

...Functions Create a gateway that Receives data from ZWave, converts and publishes them via MQTT to the MQTT broker. Receives data from MQTT, converts them and sends the appropriate commands to the ZWave devices Can handle several devices of the same type (several buttons or motion sensors) Provides MQTT topics, which can be used to set the ZWave controller into an „Add mode“ and a „Remove mode“ to add and remove further ZWave devices. Provides an MQTT topic, which can be used to delete damaged/defective devices from the ZWave controller. Provides MQTT topics, which can be used to perform a hard or a soft reset of the ZWave Controller. Provides an MQTT topic, which can be used to request a list of all registered ...

I have a ZWave Lamp Module that I would like to use to control an LED COB. They are designed for incandescent lights but I want to save electricity and still have the dimming feature

I am looking for a firmware developer who is very familiar with nRF SDK for Zigbee and Xbee modules The goal is to send some data from nRF52840 to Xbee module via Zigbee I will provide more detail to the candidate. Best regards.

... this is an external device and will communicate using UART 2. BLE 5.0 or 5.1 module , it will communicate using I2C or SPI based on module selected 3. Ublox neo 8 M 4. 4G module  for communication with 2 SIM 5. On board altimeter 6. On board RTC with independent battery 7. 6 Axis accelerator 8. on board memory 9. On board WIFI The device needs to have spare 3 UART for the following 1. Xbee 2. Sensors 3. any other device We need to have 6 digital inputs and 6 digital outputs . we need to have 4 analog inputs . The power supply of the devices has to be designed in such a way that it does reverse polarity protection and other protection against power surge .   On the software side we need to support FOTA using 4G /BLE/  wifi network 2 Versions of...

the project is to build a network in which sensors send data to Arduino nano and then the Router XBee sends the data over to Coordinator XBee. even if a node in the network goes down the data should be able to reach the coordinator XBee. you are required to design and do the essential codings for the aurdino to collect data from sensors and then send it through the attached XBee to the coordinator. pls Quote a price if you are required to configure, setup and do all the coding stuff.

An engineer that can design, code and implement an IoT system for a physical location. The IoT system will have the following requirements: • A dashboard to control the system • The system has to be reliable • With very low maintenance • Knowledge in Zwave Further details will be provided on interview

UART transmitter Requirements for the Task:- 1:-Code should be based on FSM 2:-Baud Rate should be 115200 3:-Message Transmitted by the UART like this “AB-C-DE-#” 4:-This code should work properly in FPGA board . 5:-There should be th...be three input port in code Suppose : Input A,B,C If A value is high message should be “AB-C-DE-#” If B value is high message should be “FG-H-IJ-#” If C value is high message should be “KL-M-NO-#” Details for this code:- As I mentioned earlier I need a verilog code to transmit the message as mentioned above I am using DE0 nano FPGA board connected with XBEE so that I can transmitt this particular message to the other xbee connected to the XBEE on different pc. We hope that You under what ...

Silakan Daftar atau Login tuntuk melihat rincian.

I want two xbee s2c module to communicate with each other wirelessly. The trasmitter xbee should be connected to arduino uno and power source. The reciever xbee should be connected to arduino uno , power source and a micro sd module to retain different RSSI values for different distances between the two modules. I had all components. I need help in writing codes , xbee configuration, and connections.

I have a custom build smart home automation system combining various home automation protocols (zWave, Wifi, GPIO devices) I need someone to help me create a Google smart home action using local fulfillment and the local home SDK so that I can control my home automation devices from a google hub.

Hi, personally passionate for technology started in these months the path of the automation of my house (Zigbee + WiFi + ZWave + Shelly + Homey controller). A lot of work to do... :-) Need help to realize the software to drive 4 PWM FAN (Noctua NF-A12x25 PWM) + sensor reading temperature (DS18B20). Need that the system read the temperature constantly and send it to an MQTT broker (hosted on an Homey controller). Need to be able to drive the speed and on/off of FANS through MQTT sending event from Homey to the ESP32 (using wifi). I need it to realize a cooling system for an home furniture that need to accomodate a PC, UPS and Video Amplifier. Must be able to control speed of FANS and monitor temperature from remote. Don't like to burn out all the house. Need to realize the cool...

HI , I need a embedded developer who can recreate the eval board and add a mcu with ethhernet for sending out data. please refer to to understand the...fixed reader 2. mobile reader The fixed reader is the 1st priority The product should have the following features 1. 2 RF antenna 2. The main antenna should have 4 GPIO ( 2 input 2 output ) using HTTP over ethernet as client where it sends TAg info at a slow rate of 1 tag per second . ( explained below ) 4. Rs485 based communication as an additinal option 5. support from Xbee for data transmission (2 way) 6. clock with RTC and support to time update deliverables will be 1. 2 working units of the product 2. All source code 3. gerber data 4. complete knowledge transfer

I am looking for a programmer that has a good knowledge of C and Python to program a project for me. The programmer must have a good understanding of hardware as this is required for the project. The devices used will be an Arduino mega 2560, a A9G GSM/GPS module and a Xbee 3G module. I will give more info to the selected programmer.

I saw your proposal for A rover that has a brain of raspberry pi 4B and it will use Xbee model 3 as the communication method for receiving commands and sending data. It will use infrared sensors for object detections using raspberry pi camera V2 for taking pictures and videos. It should also use motors and motor modules for moving. It will use temperature sensor to measure temperature inside the body and outside. The simulation programs preferred are simulink, labview or multisim however others programs can be accepted too. Files of the simulation as well as a small report about it is wanted too. Will pay $300.

A rover that has a brain of raspberry pi 4B and it will use Xbee model 3 as the communication method for receiving commands and sending data. It will use infrared sensors for object detections using raspberry pi camera V2 for taking pictures and videos. It should also use motors and motor modules for moving. It will use temperature sensor to measure temperature inside the body and outside. The simulation programs preferred are simulink, labview or multisim however others programs can be accepted too. Files of the simulation as well as a small report about it is wanted too.

A rover that has a brain of raspberry pi 4B and it will use Xbee model 3 as the communication method for receiving commands and sending data. It will use infrared sensors for object detections using raspberry pi camera V2 for taking pictures and videos. It should also use motors and motor modules for moving. It will use temperature sensor to measure temperature inside the body and outside. The simulation programs preferred are simulink, labview or multisim however others programs can be accepted too. Files of the simulation as well as a small report about it is wanted too.

The microphone in which the audio is being measured communicates with an I2S Philips audio protocol. A fast Fourier transform need to b...Current code is working on STM32L4 and it is being able to get the dBA value out of the RMS calculation, but doesn't have the FFT implemented and also an exponential logharitimical moving average is needed to be implemented to calculate SLOW measurements (each second), the FAST measurement (125ms) is being measured correctly. When the FFT is implemented it is needed to be provided to the UART TX (Xbee wireless transmission), the 3 frequencies with the highest power on each measurement, and the sound pressure level (SPL) with A-Weighting filter implemented to get dBA values out of it. Please only highly experience in DSP embedded systems in...

Hi, I am working on a Project, their is a section of Bump detection using Accelerometer and GPS which controlled by Raspberry pi. This data is send to the another Xbee by Xbee. If you did this before. Similar to Car project. Do text me.