Norbar spigot torque wrench jobs

Filter

Pencarian saya terakhir
Filter menurut:
Anggaran
hingga
hingga
hingga
Keahlian
Bahasa
    Pernyataan Pekerjaan
    1,189 norbar spigot torque wrench pekerjaan ditemukan, seharga USD

    We are looking to develop a stepper motor driver board to control 8 stepper motor through RS485 protocol. Each stepper motor will have different Holding Torque.

    $187 (Avg Bid)
    $187 Rata-rata
    15 penawaran

    I ne...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report. My budget is about 50-80$ Upper bids will not be accepted

    $61 (Avg Bid)
    $61 Rata-rata
    3 penawaran

    I ne...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report. My budget is about 50-80$ Upper bids will not be accepted

    $140 (Avg Bid)
    $140 Rata-rata
    11 penawaran

    I need to compare 2 phases Tesla motor with 3,4,5 phases standar...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    $61 (Avg Bid)
    $61 Rata-rata
    4 penawaran
    Trophy icon LOGO with special effects Berakhir left

    ...background. On youtube we found a great example and i made screenshots that there is a splash of water that turns into Fix and then the IF appears and burns out and then R and the wrench appears or slides in it is up to you. ****** We uploaded some pictures of the 2 effects that we like, however please note that these are only indicating directions of which

    $130 (Avg Bid)
    Bergaransi
    $130 Rata-rata
    17 entri
    Trophy icon I need some Graphic Design Berakhir left

    I need to recompose a logo, I have an imagen with a wrench over a gear and I need to put this imagen between 2 words which are FLEX and WARE as appear in the sample. The colors of the words should match the color of the gear around the wrench. The fonts to be used have to be choosen wisely according with the designer talent and appreciation, the

    $30 (Avg Bid)
    Bergaransi
    $30 Rata-rata
    25 entri

    3D models of Spigot, Latch and Hinge for game purposes so they should look as realistic as possible but keeping meshes with the least of polygons. Everything is for visual purposes so what is not seen, doesn't need to be included such as holes or screws etc, I have attached photos with visual references and dimensions.

    $69 (Avg Bid)
    $69 Rata-rata
    6 penawaran

    Looking for someone who is expert in this software http://motoran...I need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. Characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    $79 (Avg Bid)
    $79 Rata-rata
    12 penawaran

    I need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. Characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report. I need characteristic, electric, mechanic, and other Models of the

    $86 (Avg Bid)
    $86 Rata-rata
    12 penawaran

    I need to compare 2 phases Tesla motor with 3,4,5 phases standar...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    $66 (Avg Bid)
    $66 Rata-rata
    12 penawaran

    I need to compare 2 phases Tesla motor with 3,4,5 phases stan...I need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    $169 (Avg Bid)
    $169 Rata-rata
    17 penawaran

    ...conditions by using of an exhaust gas analyzer and the special software called “NetDyn” and “WinDyn” . The engine test set up includes a dynamometer to determine the engine torque and data acquisition system. At the experimental works , the engine speed ranges from 2500 rpm to 5250 rpm and step time for successive speeds is held constant

    $18 (Avg Bid)
    $18 Rata-rata
    1 penawaran
    Kwik-Way Logo Berakhir left

    Create new logo for Kwik-Way Machineshop. With logo being combined gear,bearing, wrench. Final file, no background vector file high resolution

    $25 (Avg Bid)
    $25 Rata-rata
    51 penawaran

    I have part of a crane boom that I need a CFD run on using ANSYS Fluid. The goal is to find the torque values acting around a certain point along the boom from a range of windspeed values and angles. For the project I just need someone to do up step-by-step instructions on how to setup the simulation in ANSYS that I can use to model all of the different

    $149 (Avg Bid)
    $149 Rata-rata
    34 penawaran
    Mobile development Berakhir left

    I need an Android app. I would like it designed and built. I need to build an simple app with bluetooth conection interface, for car scanning data and some ... I would like it designed and built. I need to build an simple app with bluetooth conection interface, for car scanning data and some features, similar to “Carista” and “Torque Pro”.

    $266 (Avg Bid)
    $266 Rata-rata
    61 penawaran
    Trophy icon Construction - Sticker Berakhir left

    I am looking to recreate the attached picture but would like to see a few changes...see a few changes. 1. I would like this to look cleaner and sharper 2. No Logo's 3. The chain he is holding should be able to be switched for other tools. (Example. Pipe Wrench, Hammer, Stop Sign) 4. Be creative this sticker is for Construction workers hard hats.

    $30 (Avg Bid)
    Bergaransi
    $30 Rata-rata
    14 entri
    Trophy icon I need some Logo Design Berakhir left

    Need a logo for our company. THAAT Company name stands for Technical Help All Around Town. ...device repair/service, network solutions, data recovery, etc. We like a minimalist design. Attached is something similar to what we want. There does NOT need to include a wrench. Text needs to be easy to read as the logo will go on work shirts.

    $25 (Avg Bid)
    Bergaransi
    $25 Rata-rata
    32 entri

    Given the specifications and design details, a 3D Solidworks assembly is required

    $15 (Avg Bid)
    $15 Rata-rata
    24 penawaran

    Design a Torque Multiplier of the given specifications in Solidworks

    $173 (Avg Bid)
    $173 Rata-rata
    4 penawaran

    I need the three letters in caps (M L S) . I want a wrench connected to the bottom of the S, going underneath the M & L. I also want an oil drop in front of the M. I want the colors red, white, and blue.

    $55 (Avg Bid)
    $55 Rata-rata
    80 penawaran

    I am working at a workshop that manufactures CANOPY. We have a customer who wants to work CANOPY and wants to know the torque table for screws for five different umbrellas in length only. the details 1. Glass used 14 mm 2-tubular iron unloaded 10 * 10 thickness 5 mm 3-height 7 meters 4- The structure on the concrete and not the stone 5. We will use

    $177 (Avg Bid)
    $177 Rata-rata
    11 penawaran

    ...equipment we are still looking for a new logo. There should be a clear link to the business. One idea would be an sort of a wrench (see attached file) where the wrench is used as an icon with the text "Tuinmachines" and the ending of the wrench is also the "C" from the word Coenen. Off course I would also like to see another idea to pick the best one. S...

    $30 (Avg Bid)
    $30 Rata-rata
    68 penawaran
    Redesigning Logo Berakhir left

    We have a logo for Daniel's Plumbing. Need the wrench changed to a mop and the the text to read Daniel's Cleaning.

    $58 (Avg Bid)
    $58 Rata-rata
    65 penawaran
    Control panel Berakhir left

    Controller that control the speed, the torque and reverse rotation for 9v brushless motor

    $156 (Avg Bid)
    $156 Rata-rata
    8 penawaran

    ...the construction of the arm light and strong, any polycarbonate based material such as Lexan 9034 or PVC Sheet will be used. The choice of servos that provide the necessary torque for needed manipulation has been made after referring to a number of existent and marketed robotic arms. The arm from the base up to the wrist will be custom made while the

    $458 (Avg Bid)
    $458 Rata-rata
    9 penawaran
    Trophy icon EZ-ID logo Berakhir left

    ...to identify wrench sockets. The name of the brand is EZ-ID. The product will be sold in Hardware Stores, such as Home Depot, Lowes, Ace Hardware and online. The product is a specially designed silicone ring that fits onto the socket and makes it so the socket can easily be identified. Sockets are the tools that go onto a wrench when someone

    $100 (Avg Bid)
    Sorotan Bergaransi
    $100 Rata-rata
    205 entri

    ...configuring a robotic arm rather then software, sensors, drives and controllers. You will need to do calculations such as: 1. Working out gearing ratios to achieve the desired torque in each axis 2. Working out the optimal length of each axis to achieve the desired payload 3. Calculating the reach of the robot 4. Provide assistance in choosing and sizing

    $195 (Avg Bid)
    $195 Rata-rata
    11 penawaran

    Designing and testing of a speed reducer which will reduce the speed of the input by different ratios like (10,20,25,30,40...) which will increase the output torque subsequently. For example, if a speed of 1000RPM is applied as input to a 10-Ratio speed reducer, the output speed of the reducer would be 100RPM.

    $113 (Avg Bid)
    $113 Rata-rata
    18 penawaran

    ...transform into the T logo……the T logo will ride the wave for 1-2 seconds and then should flip and spin in a powerful way to the middle of the screen, and in the dog voice say……Torque Jet Boards Coming soon…… Or we can change the story line to something else, this is just a sample idea. Now you can see the Mongrel dog on the opening of the websi...

    $28 (Avg Bid)
    $28 Rata-rata
    8 penawaran

    This is a very simple project and we will select the lowest ...rotary table. Rotary table will be rotating to 45 degrees in 1 sec and will stop in precise 45 degrees. Rotary table will have 8 stops. We need to calculate the exact holding Torque to ensure that the table stops rotating at precise location. Also, a few more sections to be calculated.

    $20 (Avg Bid)
    $20 Rata-rata
    2 penawaran

    We are developing a machine which has a rotary table with fo...rotary table. Rotary table will be rotating to 45 degrees in 1 sec and will stop in precise 45 degrees. Rotary table will have 8 stops. We need to calculate the exact holding Torque to ensure that the table stops rotating at precise location. Also, a few more sections to be calculated.

    $53 (Avg Bid)
    $53 Rata-rata
    30 penawaran

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    $716 (Avg Bid)
    $716 Rata-rata
    9 penawaran

    Provide maximum and minimum torque specifications for hold down bolts and driver compartment screws for cast aluminum streetlight housing. Provide Effective Projection Area (EPA) Calculations for wind load calculations. Submitter shall be qualified to perform structural calculations and certifications for roadway structures. Submittal shall

    $201 (Avg Bid)
    $201 Rata-rata
    7 penawaran

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    $565 (Avg Bid)
    $565 Rata-rata
    12 penawaran

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    $451 (Avg Bid)
    $451 Rata-rata
    5 penawaran

    ...a autos: Usados : Auto Kilometraje Año Precio desde Nuevo :Auto Ficha técnica Moneda ( Moneda ) Precio desde Auto ( abstract ) Motor Potencia Torque Transmisión Tracción Ruedas Cilindrada Cilindros / Valvulas Distancia entre ejes Largo Ancho sin espejos Alto Baul Peso Tanque de combustible Modelo ( sport

    $507 (Avg Bid)
    $507 Rata-rata
    26 penawaran
    Trophy icon Make a product flyer Berakhir left

    ...part. There are 2 product "classes" within this product category: SUPERFLEX and MEGAFLEX . SUPERFLEX is our High Performance line, MEGAFLEX is for extremely high power and torque applications. We want all our marketing materials to portray that our product is the Rolex of this product type. Please use 8.5" x 11" as a reference for size, as we

    $50 (Avg Bid)
    Bergaransi
    $50 Rata-rata
    15 entri

    ...in one hand he is holding a jolly roger flag which is the picture of the patch that has the skull and cross bones on it and in the other hand he is holding a giant crescent wrench he will be towering over a desert ground that has oil refinery flame towers. Above him will be 3 KC-130Js in formation like the one in the attached folder the C-130s in the

    $58 (Avg Bid)
    $58 Rata-rata
    36 penawaran

    ...with Jiffy Lube's quality performance policy. White area for signature and date. (see sample but don't copy) Check boxes: Oil Level Verified: Oil Cap Verified: Plug Torque Checked: Oil Filter Verified: Air Filter Box Checked: Window Quality Checked: Vacuum Quality Checked: Window Sticker Checked: Bottom area: Make look like a coupon

    $300 (Avg Bid)
    Sorotan Bergaransi Kontes Teratas
    $300 Rata-rata
    21 entri
    Design project Berakhir left

    I need a logo designed. Looking for the letter P with a fist holding it and the letter S together and maybe a wrench at the bttm of the P.

    $26 (Avg Bid)
    $26 Rata-rata
    65 penawaran

    Simulate timing cam ,air flow ,torque speed,fail and etc

    $436 (Avg Bid)
    $436 Rata-rata
    10 penawaran

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    $701 (Avg Bid)
    $701 Rata-rata
    11 penawaran

    ...illustration the dark brown tone of the logo file. Now in same style I need the following ones Name Description Mechanical As in logo circle with cock wheel, in it one wrench Electrical one lightning (high currency) symbol Process A person behind some monitors Civil one steel bar Claim a scale (as in court) Automation 0 and 1 going

    $120 (Avg Bid)
    $120 Rata-rata
    33 penawaran

    ...RPM CONSTANT TORQUE, reversible direction unit. The motor will drive a small lathe via belt/pulley drive (this is NOT part of this job description) . The control box will have a basic functions: a display showing motor speed and CW/CCW direction switch). Your job is to - select DC suitable motor which can provide constant torque - design control

    $772 (Avg Bid)
    $772 Rata-rata
    16 penawaran
    Trophy icon Logo Design for Spanner Physiotherapy Berakhir left

    ...my logo to include business name, slogan and a graphic. I prefer the graphic to be on the left of the business name and slogan, I would like the graphic to be of a spanner/wrench. I like handwriting style font. I'd like it to have a feminine edge, I like vintage style I like orange/brown/yellow/gold shades on a light/white background but this is flexible

    $143 (Avg Bid)
    Bergaransi Bersegel Kontes Teratas
    $143 Rata-rata
    181 entri

    ...[login untuk melihat URL] TEMPERATURE & HUMIDITY SENSOR [login untuk melihat URL] SERVO [login untuk melihat URL] WATER SENSOR [login untuk melihat URL] N. 3 PERISTALTIC PUMPS Your task is to program our 4DUINO

    $200 (Avg Bid)
    Lokal
    $200 Rata-rata
    2 penawaran

    Project scope: For a pers...[login untuk melihat URL] TEMPERATURE & HUMIDITY SENSOR [login untuk melihat URL] SERVO [login untuk melihat URL] WATER SENSOR [login untuk melihat URL] N. 3 PERISTALTIC PUMPS

    $247 (Avg Bid)
    $247 Rata-rata
    16 penawaran

    Hi elinavarro, You won a contest of mine on 99 a few weeks ago for our party plannin...for one more update. I assume you still have the files to make the changes. We'd like to move the pendant and have the yeti wearing it around his neck and and then make the wrench in the emperors hand about half the size. For reference this is the "BattleRM_2" file.

    $50 (Avg Bid)
    $50 Rata-rata
    1 penawaran

    ...Adjusting the control panel with the tire nozzles. If necessary. Scene 08 - Attach the hose to the outside tire. Scene 09 - Attach the hose to the tire inside using the elongated wrench. Scene 10 - Calibration with the Pistol in the center of the rear tires. Scene 11 - Calibration with the Pistol on the front tire using the special nozzle. Scene 12 - Foam

    $5857 (Avg Bid)
    $5857 Rata-rata
    39 penawaran

    i want to connect induction motor to the hydraulic pump so that it can give produce motor speed which can moving at specific flow ra...pump so that it can give produce motor speed which can moving at specific flow rate and pressure in the pumping system. I also want to produce the graph for varied speed vs torque and efficiency of the induction motor.

    $313 (Avg Bid)
    $313 Rata-rata
    7 penawaran