Arduino electrical engineerPekerjaan

Filter

Pencarian saya terakhir
Filter menurut:
Anggaran
hingga
hingga
hingga
Tipe
Keahlian
Bahasa
    Pernyataan Pekerjaan
    60,347 arduino electrical engineer pekerjaan ditemukan, seharga USD
    ARDUINO NANO SHIELD Berakhir left

    I NEED SOME ONE WHO CAN DESIGN AN ARDUINO NANO SHIELD WITH SPECIAL SPECIFICATIONS THAT CAN BE DISCUSSED ON CHAT. THE DESIGN MUST INCLUDE THREE WORKING PROTOTYPES WITH ALL CHIPS ON IT (NOT JUST THE PCB DESIGN).

    $190 (Avg Bid)
    $190 Rata-rata
    25 penawaran

    I need an ultrasonic sensor with Bluetooth capabilities that can connect to an Android device. The premise is I would like a blind spot detection that alerts my phone when someone is in my blind spot. I'd prefer to use a 16mm Ultrasonic Sensor, something small that is easy to place in my car. Also if possible I'd prefer it in a custom app rather than the standard Arduino android apps. Bu...

    $534 (Avg Bid)
    $534 Rata-rata
    36 penawaran
    Write Arduino Code Berakhir left

    Write code to interface a keypad to a arduino. Simple code. Expect to have the code done in 12hours

    $30 (Avg Bid)
    $30 Rata-rata
    3 penawaran
    Hotel in Maryland Berakhir left

    Need Coordination electrical drawings in AutoCAD. Electrical conduits shall be routed without conflicts with other trades and with minimal bends and shortest routing.

    $932 (Avg Bid)
    $932 Rata-rata
    16 penawaran

    I need you to develop some software for me. I would like this software to be developed using Python.i would like to have a device that connect through bluetooth in a rasberry by and play music through some speakers also must be mobile friendly and able to connect in a mobile app in android .The target is to connect a rasbey pi and arduino that will be possible play music see the weather forecast ...

    $95 (Avg Bid)
    $95 Rata-rata
    6 penawaran

    ***PROJECT SUMMARY*** I have created a detailed functional specification which I want you to help me transform into a circuit design. This is *not* a PCB layout project. This is a circuit design project. Although the circuit will likely use an ESP8266, I do not require that you have any experience with the ESP8266. Instead, I am looking for engineers who have experience with micro-controlle...

    $9 / hr (Avg Bid)
    $9 / hr Rata-rata
    17 penawaran
    Controls Engineer Berakhir left

    System Design and PLC Programming

    $147 (Avg Bid)
    $147 Rata-rata
    17 penawaran
    Design project Berakhir left

    I need a graphic designer. I need a motion graphics designer to explain about my products. My products is a wifi switch board followed by a control. With this u can control all ur electronic and electrical instrument over the mobile phone with the help of our APP.

    $124 (Avg Bid)
    $124 Rata-rata
    5 penawaran

    I am looking for embedded engineer for 2 weeks client site testing in baner , pune with following skills requirements. 1. Knowledge of embedded technology 2. C language, assembly language 3. Cloud server configuration 4. Work on different types of communication (SPI, ethernet, http server communication) 5. TI(Texas Instruments) CC3200 launchpad Project Concept is to receive data over SPI ...

    $292 (Avg Bid)
    $292 Rata-rata
    5 penawaran

    must be a electrical or electronics engineer

    $52 (Avg Bid)
    $52 Rata-rata
    21 penawaran

    I need you to write a research article. I am fracis joseph a diploma holder of aircraft maintenance engineer

    $978 (Avg Bid)
    $978 Rata-rata
    9 penawaran

    Its more about reading the project than writing code. [login untuk melihat URL] the project is this and i have 2 example codes on it and also written code by me. 1st 4 questions are done u will only need to do 5-6-7 which i already have the code for i will share with u u must change and understand. It wont probably take even an hour after understanding the code.

    $26 (Avg Bid)
    $26 Rata-rata
    4 penawaran

    I am looking for Arduino Developer for development and testing of small Arduino applications. Similar project: [login untuk melihat URL]

    $244 (Avg Bid)
    $244 Rata-rata
    24 penawaran
    civil engineer Berakhir left

    soyamilk processing plant layout

    $31 (Avg Bid)
    $31 Rata-rata
    5 penawaran
    web developer Berakhir left

    We need a full time web developer cum software engineer who has experience at least 2 year on given technology like .... PHP, HTML, CSS, JS, Mysql, android developer etc . We will prefer local person who lives in around Varanasi.

    $91 (Avg Bid)
    $91 Rata-rata
    10 penawaran

    I need a some one to give me a solution so I can encode and decode using an MCU (Arduino or any other MCU) a FSK code a based on BELL 202 Modem standard, 1200 baud, half duplex. The solution may be a code or an hardware (frequency filters) and a code for MCU. If it is possible I prefer the solution with C code where only a pin and interrupts on that pin are used without any external hardware fr...

    $172 (Avg Bid)
    $172 Rata-rata
    4 penawaran
    Trophy icon Design a Logo Berakhir left

    Hi there, We are a plumbing and electrical company named "Wavelength Plumbing and Electrical" We are after a sleek, minimal design with "wavelength" being the main focus and "Plumbing and Electrical" being a smaller focus.

    $50 (Avg Bid)
    Bergaransi
    $50
    248 entri

    software engineer wanted for technical work I'm looking for an engineer to help me with technical work. You should have good writing skills. I can accept from both the individuals and companies.

    $106 (Avg Bid)
    $106 Rata-rata
    4 penawaran

    software engineer wanted for technical work I'm looking for an engineer to help me with technical work. You should have good writing skills. I can accept from both the individuals and companies.

    $361 (Avg Bid)
    $361 Rata-rata
    3 penawaran
    Arduino Development Berakhir left

    I am looking for Freelancer Arduino Developer for development and testing of small Arduino applications

    $102 (Avg Bid)
    $102 Rata-rata
    36 penawaran
    Logo Design Berakhir left

    I have an electrical business that i would like a modern logo design for. The logo will be used on letters, invoices and perhaps a t shirt or hat. Something simple, bold and modern.

    $58 (Avg Bid)
    $58 Rata-rata
    87 penawaran

    Architectural Drafter (Designer) is required to develop exterior and interior elevations from as-built plans of 1 story (5000 - 10000 sqft), detailed and accurate elevations are required, some heights provided, other has to be calculated or approximated. 10 projects to be developed on the next month, you are bidding over one single project. 100 to 150 projects per year guaranteed if requirem...

    $158 (Avg Bid)
    $158 Rata-rata
    51 penawaran

    Looking for a support who have a experience in Provisioning , Monitoring and Management of Firewalls IPS/IDS

    $493 (Avg Bid)
    $493 Rata-rata
    20 penawaran

    We are looking for a Quality Assurance (QA) engineer to develop and execute exploratory and automated tests to ensure product quality. QA engineer responsibilities include designing and implementing tests, debugging and defining corrective actions. You will also review system requirements and track quality assurance metrics (e.g. defect densities and open defect counts.) The QA technician ro...

    $49 / hr (Avg Bid)
    $49 / hr Rata-rata
    24 penawaran
    laid benlarbi Berakhir left

    Engineer at ATOCAD Writer in WordPress Painter

    $9 - $34
    $9 - $34
    0 penawaran

    I am developing an electronic prototype device that will monitor windspeed and direction using an array of air pressure sensors. This prototype will be tested in a wind tunnel. The device will be physically connected by a USB connector to a laptop computer that will display the sensor output and log the sensor readings for later study and analysis. I have included documentation and links for ...

    $84 / hr (Avg Bid)
    $84 / hr Rata-rata
    23 penawaran

    I've used Arduino board and Pulse sensor to measure heart beat per minutes and calculate heart rate variability using both Arduino IDE and processing. My next step which I'm looking for help are the following: 1. Upload heart rate variability to the cloud (any cloud service provider) using WiFi shield or through connecting Arduino to any microprocessor that has built-in WiFi capability (...

    $150 (Avg Bid)
    $150 Rata-rata
    1 penawaran

    Fully dimensioned site plan for second floor and bedroom on third floor 1. Plans must be drawn to one of the following scales: Engineer: 1"=10'; 20'; 30'; 40'; 50'; 60'; 100' Architect: 1/16; 1/8; 1/4; 3/16 2. Site plans are limited to a maximum of two sheets per set 3. Sheet size could be 11"x 17" or 18"x 24" (pdf or any format to ...

    $132 (Avg Bid)
    $132 Rata-rata
    20 penawaran

    I've used Arduino board and Pulse sensor to measure heart beat per minutes and calculate heart rate variability using both Arduino IDE and processing. My next step which I'm looking for help are the following: 1. Upload heart rate variability to the cloud (any cloud service provider) using WiFi shield or through connecting Arduino to any microprocessor that has built-in WiFi capability ...

    $612 (Avg Bid)
    $612 Rata-rata
    34 penawaran

    I need a bluetooth enabled "nano" arduino (google "bluno nano") with a GY-521 "built in" to the same PCB, the board should have a connection for a 3S battery (built in charger circuit via external 111-14Vdc). It should also have a built in 3 Phase BLDC motor driver similar to an ESC (electronic speed controller) sized similar to 35A (connection to motor via screw typ...

    $251 (Avg Bid)
    $251 Rata-rata
    15 penawaran

    I have a few problem sets that I need help to solve and understand, perhaps through Skype we could share screen and teach me how to solve them. I attached the problem sets

    $95 (Avg Bid)
    $95 Rata-rata
    12 penawaran
    Signal Robot Berakhir left

    A Mechanical and Electrical engineer to create a 3D Design model of the inner workings of a robot with the motor showing how it moves around and turns the outer lights on and off.

    $162 (Avg Bid)
    $162 Rata-rata
    15 penawaran

    I need a small pcb board designed where on one side there is 18 pairs of pins in rows of 6 pairs (3) rows 36 pins total to the other side where there needs to be wire to board adapters that hold rows of 12 pins. The designer will need to be USA based so that I can ship the part to you that this board will fit into so distance between pins can be measured.

    $108 (Avg Bid)
    $108 Rata-rata
    12 penawaran

    I am a mature student with a heavy workload and I need someone to design a small app that opens with a map of my current location and a text logo, plus date and time. Then I need a shake feature which removes the map and returns the screen to an an image. I can then reverse engineer the program and re-create it so I can learn how to do it myself

    $144 (Avg Bid)
    $144 Rata-rata
    39 penawaran

    I'm an engineer, working in Ashok Leyland as Design engineer. I have good knowledge in Catia V5 and product development

    $115 (Avg Bid)
    $115 Rata-rata
    1 penawaran

    Hello, I bought three CC2530 modules: [login untuk melihat URL] One development board: [login untuk melihat URL] Three USB explorer boards: [login untuk melihat URL] And original CC debugger: [login untuk melihat URL] ----------------------------------------------------------------------------------------- Here is what I need: I don't want to use 8051 MCU on ...

    $197 (Avg Bid)
    $197 Rata-rata
    5 penawaran
    Project for Moid A. Berakhir left

    I'm an engineer I have good typing skills and experience in word excel and PowerPoint. I'll do all works within time period

    $72 (Avg Bid)
    $72 Rata-rata
    1 penawaran

    I need to submit architect drawings for a double storey extension. This will replace existing Patio. Have the conceptual idea / need help in preparing Engineering Drawing diagrams that can be submitted to get Plan Approval. ( This for a city in the Bay Area - California. - knowledge of local Building standards / codes will be required). Thank You

    $408 (Avg Bid)
    $408 Rata-rata
    10 penawaran

    This is about creating a demo which connects ESP32 microcontroller to Bluetooth headset with a microphone, gets 3-5 seconds of audio after pressing a button on headset and plays it back to headset. Successful freelancer will get US$300 for his sourcecode (made in Arduino IDE) after demonstration and awarded with further development. Check my reputation.

    $247 (Avg Bid)
    $247 Rata-rata
    12 penawaran

    Very small simple drone project using a remote control to fly the drone or an App already made. Features are just flight. I want code and schematics

    $19 (Avg Bid)
    $19 Rata-rata
    5 penawaran
    Electronics Design Berakhir left

    We are looking for engineer who can design few of our harware requirements as per the requiremnts

    $116 (Avg Bid)
    $116 Rata-rata
    17 penawaran

    An electrical engineering company is looking for ongoing administrative assistance from a person who has experience in technical writing and preparation of business proposals. The successful bidder will be responsible for the preparation of; 1. Business letters / emails 2. Qualification documents 3. Business proposals and bids 4. Other business related documents The successful bidder sho...

    $7 / hr (Avg Bid)
    $7 / hr Rata-rata
    13 penawaran
    Web server API REST Berakhir left

    I need a new website. I already have a design, I just need you to build my personal website and add an API in it with a database to store some data sent by my arduino over internet.

    $28 (Avg Bid)
    $28 Rata-rata
    8 penawaran

    ou are being issued with a list of balances extracted from the books of Electrical Contracting Ltd (see page 9 and page 10 of that document). From that list of balances extracted from the books of Electrical Contracting Ltd you are to prepare a Profit and Loss Statement for the year ended 31st December 2014 and a Balance Sheet as at that date. You are required to: Prepare the Profit and Loss...

    $96 (Avg Bid)
    $96 Rata-rata
    13 penawaran
    Need OCR expert. Berakhir left

    Hi. I need an OCR expert for my project. Beautiful female software engineer is highly preferred. Feel free to bid.t thanks

    $29 (Avg Bid)
    $29 Rata-rata
    1 penawaran

    Hi, I am looking for a Electronics Engineer/Tutor who can tutor me some important concepts of the Engineering Design. I am looking for someone who has background in Electronics and Digital Logic Design. Happy Bidding!

    $11 / hr (Avg Bid)
    $11 / hr Rata-rata
    17 penawaran

    Instructions: Project: Part A: Surfaces and Solid modelling Introduction you will reverse engineer an Electric Power Drill, manufactured using injection molding process and made from a Polymer material. The goal of this project is to accurately reproduce every component of the product using 3D solid & surface modelling. Through this process the student will learn manufacturing process and...

    $128 (Avg Bid)
    $128 Rata-rata
    36 penawaran

    Hello, I am looking for a person, who has electrical/electronics background and is able to help me. You must have problem solving abilities to apply for this post. Thank you! Happy Bidding

    $12 / hr (Avg Bid)
    $12 / hr Rata-rata
    2 penawaran

    I am developing an electronic prototype device that will monitor windspeed and direction using an array of air pressure sensors. This prototype will be tested in a wind tunnel. The device will be physically connected by a USB connector to a laptop computer that will display the sensor output and log the sensor readings for later study and analysis. I have included documentation and links for ...

    $569 (Avg Bid)
    $569 Rata-rata
    28 penawaran