AbaqusPekerjaan

i have to model shape memory alloys on reinforced concrete using Abaqus from experiemental test . to achieve the recovery of stress of Shape memory alloys using predefined field.

I need: - Videotutorial of a circular water tank and do modal analysis - Compare the results with the housner convective and impulsive mode, used in the API 650 international standard. - All files used The expert must validate the abaqus model with the housner model. Attached image of the dimensions and properties of the tank.

I need someone for a project who knows how to work with AM Modler Plugin in Abaqus software

FEM simulation of a 0.6 mm thick Nitinol spring External diameter 4mm, total length 20mm, 1.5mm pitch undeformed (2.1mm pitch deformed) from the martensitic state plastically deformed to the state of restoration of the initial dimensions in the austenitic phase, showing all the emf maps with stress loads main stresses etc. A small description of how the model was obtained and simulated is also necessary, it is also necessary to know for that spring the load that the spring is capable of lifting if after the cold deformation in the martesitic phase it is heated bringing it to the austenitic phase.

I need the tutorial of a circular water tank and do modal analysis, and compare the results with the housner convective to impulsive mode, used in the API 650 international standard. Attached image of the dimensions and properties of the tank.

analyze distribution temperature of fluid inside the pipe using ABAQUS software

analyze distribution temperature in piping

ONLY EXPERTS AND WITH EXPERIENCE IN THIS WORK, do not make me waste my time with people who are learning. VERIFIABLE EXPERIENCE REQUIRED. Important documents are attached. Read please. ONLY THE ABAQUS SOFTWARE It is necessary to model in ABAQUS, 2 steel tanks with water inside, one of them without seismic isolation and the other with seismic isolation at the base. It is necessary to analyze the fluid-structure-seismic insulator interaction. At the base of the tank with seismic isolator, there are 2 types of seismic isolators, which must be modeled in 3D, with programmed connector elements that determine the hysteresis of the seismic isolator. There are 20 "red color" type seismic isolators and 11 "blue color" type seismic isolators. The hysteresis curve...

I just need someone to open the 2019 file into 2020, it will prompt you to convert the file. The save it and send back to me. Need done now, please dont offer if you cant do it in the next 30 mins.

I need somebody to help me in the next few hours to plot force-displacement from a 3-point bending model. 30 mins to 1 hour live support

Basically what I want to do is to model the finite element of the reduced beam section welded connection using Abaqus software. The result would be compared to result gotten in the laboratory. Kindly study fig. 1a, 1b, 2c, fig 5 to have insight to the project.

ONLY EXPERTS AND WITH EXPERIENCE IN THIS WORK, do not make me waste my time with people who are learning. VERIFIABLE EXPERIENCE REQUIRED. Important documents are attached. Read please. ONLY THE ABAQUS SOFTWARE It is necessary to model in ABAQUS, 2 steel tanks with water inside, one of them without seismic isolation and the other with seismic isolation at the base. It is necessary to analyze the fluid-structure-seismic insulator interaction. At the base of the tank with seismic isolator, there are 2 types of seismic isolators, which must be modeled in 3D, with programmed connector elements that determine the hysteresis of the seismic isolator. There are 20 "red color" type seismic isolators and 11 "blue color" type seismic isolators. The hysteresis curve...

Dynamic crash analysis results for a frame designed in CATIA I have the frame as STP , IGS , CATAI want the result of the frame when it gets an accident , hitting wall at high speed , maybe 50kh/hr ,or higher want screenshots of the result ( the crash simulation ) and report of the details like the speed of frame , time of crash Using ANSYS, ABAQUS or Solidworks

Design Optimised Bicycle Frame Design • Bicycle frame design and development. • CAD Modelling • Drafting on CAD software. • CAE analysis of bike frame members and weld design • Motor transmission casing design on CAD • Gear, Shaft, Bearing calculations • Proficient in CAD and reading engineering drawings (In Solidworks and CATIA). • Linear and non-linear finite element simulation (ABAQUS) • Knowledge of GD&T. • Experience of FMEA (Failure Mode Effects Analysis), Kaizen/A3 (continuous improvement and problem solving) process improvement and Poka Yoke (error proofing) techniques.

i have frame 3 D model , i want a car crash , dynamic simulation report of the car at speed of 40km/hr hits wall i want the screenshots of the work and results and the paramters assumed , like time of crash using ABAQUS OR ANSYS .

We would like to simulate the sph modelling of fssw process. The journal paper we are referring is also attached.

A VUMAT code has to be written for Abaqus. I have written the plasticity part but finding difficulty in writing damage part. So any one with Fortran and Abaqus knowledge please help me. The code should provide plasticity and damage in material .

Hi Vincent Omondi O., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I need professional expert can make the model and analysis ABAQUS Software for NUMERICAL ANALYSIS OF MODIFIED BOLTED INTERNAL STEEL CONNECTIONS WITH ELBOW PLATES

I need professional expert can make the model and analysis ABAQUS Software for NUMERICAL ANALYSIS OF MODIFIED BOLTED INTERNAL STEEL CONNECTIONS WITH ELBOW PLATES

Abaqus Software Mechanical Engineer Expert

Design 2 separate beams and analyze them using Abaqus: one using retrofitting and one without retrofitting. It's civil engineer related project.

Problem statement: 1) A chain skipping on the sprocket due to inappropriate sprocket design 2) The common materials used have limitation to withstand the loads, stress and fatigue condition of sprockets. 3) The motorcycle sprockets teeth wear out quite quickly and need a replacement. OBJECTIVE: (Using Abaqus Simulia and Fe-safe) 1) To analysis the static parameters such as stress, strain and fatigue of sprocket motorcycle at different materials using Fenite Element Method (FEM) 2) To predict the life cycles of the sprocket design.

ABAQUS and report writing 750 words

Abaqus Software Mechanical Engineer Expert

I want someone whos good at simulation softwares to create a simulation of the miami apartment building collapse. Preferably using AutoCad/Abaqus

Need a project report on "'Axial compressive behaviour of perforated stainless steel circular hollow section member". And few graphs of load vs axial deformation

axial compression of perforated stainless Steel structure using abaqus software

We want to compare the advantages of auxetic embedded I-beams' properties with conventional I-beams while subjecting them under bending and buckling. We are simulating all the processes in ABAQUS CAE software.

Just basic laser engraving on polyamide coated with graphene oxide just one line of laser engraving will do the work.

I need a specialist STRUCTURE ABAQUS EXPERT. i have a model that need to be analyzed related to functionally graded sandwich beam affected by the static load with different cases in boundary condition and dimensions

Silakan Daftar atau Login tuntuk melihat rincian.

Necesito hacer un análisis de una estructura de metal en abaqus

I want you to write me a report covering all tasks and objectives in the brief, and draw the specimen on abaqus and provide the results from ABAQUS. then compare the results from the practical experiment and the analytical solution showing the differences and source of error

I want you to write me a report covering all tasks and objectives in the brief, and draw the specimen on abaqus and provide the results from ABAQUS. then compare the results from the practical experiment and the analytical solution showing the differences and source of error

Hi Kamran M., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Its about Abaqus numerical modelling of elliptical columns. The period of time to do the task is in 1 or 2 days.

Hi Andro., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Its about Abaqus numerical modelling of elliptical columns. The period of time to do the task is in 1 or 2 days.

Hi Kateryna K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Its about Abaqus numerical modelling of elliptical columns. The period of time to do the task is in 1 or 2 days.

Hi Michael S., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Its about Abaqus numerical modelling of elliptical columns. The period of time to do the task is in 1 or 2 days.

Abaqus Software Work+Research Writings

Person with experience using ABAQUS to design the modelling of elleptical hollow columns to test their characteristics ( buckling test, torsion, etc). Numerical modelling in ABAQUS with 2 different grades. It is quite simple, anyone interested contact me ASAP. It's a short task.

Please refer to the screenshots

ABAQUS Expert needed for Error Resolving in Existing Model

Modelling of composite material pipe under internal pressure and axial tensile load using several methods: 2D axisymmetric, 2D shell, 3D shell, and 3D solid

Abaqus Software Work+Research Writings

Abaqus Software Work+Result and Discussion Writings+Conclusion Writings

I need help with Model a robot arm using ABAQUS to perform FEA, i will provide more details in the chat.

I need to simulate some numerical results for a scientific article. I have two options of cast-in channels that need to be subjected to a tension force that simulates pull-out from concrete. After that I will need to compare results. What is required is VM Stress and and Deflection/Displacement for each of the two, one for the steel and one for the concrete. I have the Abaqus model built for both options, it needs a look at meshing, boundary conditions and load application.

Want to get a FEM analysis on a RC beam created on ABAQUS software using the Concrete Damage Plasticity Model. All the details and required data will be provided. In post-processing, stress-strain graph, representation of failure cracks are the requirements. PFA the image of the model which is to be modeled.

...x 1 meter x 1.5 meter (l x w x h). Please note that only SI units to be used like Meter or millimetre, Kg, Newtons, Pascals etc. 3. Consider any SUV weighing between 1800 to 2000 kg i. Tire size: 235/65R17 ii. Tire diameter is 736.6 mm iii. Surface to be considered as sand 4. The simulation approach should be as follows: i. Dynamic Simulation to be performed in Abaqus or Ansys Workbench with given combinations of data-sets as given below. Please don’t use student version ii. The tire should be Hyper-elastic model: Neo-Hookean & Ogden iii. The tyre pressure to be considered are (P): 25 and 30 psi for 2 cases respectively iv. The velocity to be considered (V): 20 km/hr v. Load on wheel (W): 600 kgs vi. There should ...

I want someone who works on abaqus software. I’ll give them the geometry they just have to put the boundary conditions and do a FEA analysis.