Embedded Software Developers Untuk Dipekerjakan

  • Perangkat Lunak Bawaan
Saran-saran:
lebih banyak

Negara

Lokasi Spesifik

Ujian

Tarif Per Jam (USD)

Penilaian

Online

  • Rekrut xiaoqideng
    4.6
    5 ulasan $30 USD per jam
    Dear Client. Thank you for your kindly visiting to my summary. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 10 years designing experiences using Altium Design Tool and Simulation...
    Dear Client. Thank you for your kindly visiting to my summary. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 10 years designing experiences using Altium Design Tool and Simulation Tools. 2) Firmware Development Experiences. - Rich knowledge and experiences at C/C++/Embedded C. - I like using various of MPU, ARM, PLD and embedded system equipment. MCUs : STM32 family, PIC16F/18F/33F, Atmega family, 8051 family, NRF51822/52832, MSP430, LPC, Atmel, CC2540/CC2541, CC3200, MPU6050, Wifi-MCUs : ESP8266/ESP32. Arduino Linux-Embedded: - Experience with Keil, IAR, Atmel Studio, QT IDE, Arduino, Visual Studio. - Rich experiences at variant peripherals. UART, I2C, SPI, USB, Ethernet, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, xBee, Zigbee. - LED controlling wih Neopixels. I'm always work on my client's timezone. Thank you for your time. kurang
  • Rekrut ched41
    5.3
    7 ulasan $15 USD per jam
    I am an Experienced embedded developer with more than 5 years experience in microcontroller firmware development and electronic hardware prototyping. I specialize in firmware development for IoT and Automation applications. personal site: https://daviduche.com Core Skills: C / C++ , ...
    I am an Experienced embedded developer with more than 5 years experience in microcontroller firmware development and electronic hardware prototyping. I specialize in firmware development for IoT and Automation applications. personal site: https://daviduche.com Core Skills: C / C++ , Python, ARM CORTEX M-family Programming (C / C++ ), Arduino and Arduino compatible systems firmware development, x86 Assembly, MIPS Assembly Platforms: STM32, NXP Series, Arduino, Atmega, Raspberry PI, ESP8266, IDEs: IAR Systems, mBED, KEIL, Arduino IDE Internet Protocols: TCP/IP, MQTT, HTTP, UDP Front-end Frameworks: NodeJS (node-red), Ionic Framework kurang
  • Rekrut DevStar925
    2.5
    1 ulasan $35 USD per jam
    Programming is my pleasure, and my life. I began programming at 12age, and solving complicated problems and creating user-friendly applications are two of my passions. I've been working on a lot of projects and I've been using a lot of good programming practices and patterns, that are helping me with development. My...
    Programming is my pleasure, and my life. I began programming at 12age, and solving complicated problems and creating user-friendly applications are two of my passions. I've been working on a lot of projects and I've been using a lot of good programming practices and patterns, that are helping me with development. My major works are c/c++ programming, java, python, PHP, mobile app development, network simulation, metatrader, and embedded devices like Arduino, Raspberry pi. Also, I have rich experience in blockchain, bitcoin, and crytocurrency exchange area too. I always looking for new challenges and opportunities. Please give me your idea, then I will provide the best solution for you. Thanks kurang
  • Rekrut levstremetskyi80
    4.8
    3 ulasan $35 USD per jam
    ⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx...
    ⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE And here are some of tools that I normally use, but not limited to: - Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Ansoft, ADS, HFSS, MATLAB, Quartus II, CCS, Micro C, etc. Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you. kurang
  • Rekrut greusser
    4.7
    1 ulasan $25 USD per jam
    I consider myself to be something of a jack of all trades. I love to explore new ideas and solving them with electronics which often means I seek new knowledge in many areas adjacent or outside computer engineering. I have experience including but not limited to: -PCB Layout -High power circuitry -Audio...
    I consider myself to be something of a jack of all trades. I love to explore new ideas and solving them with electronics which often means I seek new knowledge in many areas adjacent or outside computer engineering. I have experience including but not limited to: -PCB Layout -High power circuitry -Audio circuitry -Microcontroller design and programming -FPGA/ASIC design and testing -Electromagnetics -UI/App development -Networking and Cloud services I also own a 3D printer, CNC machine, and Laser Engraver/Cutter which can be used for prototyping. kurang
  • Rekrut mechatronicsengr
    6.0
    34 ulasan $25 USD per jam
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training kurang
  • Rekrut manojkhichar
    4.3
    3 ulasan $25 USD per jam
    We Provide the complete solution of web development and web design, we have good experience in: 1. Static Website 2. Dynamic Website 3. E-Commerce Store 4. Information website 5. Blog Website 6. Forum Website 7. Custom Module Development 8. CMS ( WordPress, Joomla, Drupal, Magento ) 9. MVC...
    We Provide the complete solution of web development and web design, we have good experience in: 1. Static Website 2. Dynamic Website 3. E-Commerce Store 4. Information website 5. Blog Website 6. Forum Website 7. Custom Module Development 8. CMS ( WordPress, Joomla, Drupal, Magento ) 9. MVC Framework ( Cakephp, Codeigniter, Yii, Laravel ) 10. Graphics Design ( illustrator, banner, template ) SKILLS : HTML5 | CSS3 | PHP | WORDPRESS | JOOMLA | DRUPAL | MAGENTO | YII | LARAVEL | IOS | ANDROID | ADOBE | PHOTOSHOP | CORELDRAW | FLASH | ILLUSTRATOR | SEO | SMO | SME | SMM kurang
  • Rekrut ahmad5857
    4.8
    9 ulasan $15 USD per jam
    We are Expert TEAM with exceptional skills and professional attitude. At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development. We analyze and produce complete Product Design and ensure reliability. Our area of expertise include. 1. Electrical...
    We are Expert TEAM with exceptional skills and professional attitude. At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development. We analyze and produce complete Product Design and ensure reliability. Our area of expertise include. 1. Electrical & Electronics Engineering 2. Software Development 3. Product Design and Prototyping 4. Networks. 5. Programming in C, C++, Python. 6. Graphical Designing and Graphical Interfacing of Software. 7. Android Application Development. 8 Hardware and Software Integration. 9. Internet of Things Products. Node.js, JSON etc 10. Troubleshooting. We provide constant and full support to our clients for all kind of projects. In short, we are a place where hardware meets software. Regards, Ahmed Note: Some negative reviews are because some clients first pretend to develop one thing later end up pushing us to develop quite different thing. kurang
  • Rekrut krunalbhongade
    4.5
    10 ulasan $20 USD per jam
    We are a team of highly motivated individuals. We aim to provide our clients with the best quality work. We have great experience in designing electronics and Embedded systems and have developed automation for a solar plant. We can offer you one stop solution from prototyping to manufacturing and can design apps for...
    We are a team of highly motivated individuals. We aim to provide our clients with the best quality work. We have great experience in designing electronics and Embedded systems and have developed automation for a solar plant. We can offer you one stop solution from prototyping to manufacturing and can design apps for monitoring and controls for windows and Android. Website: http://www.smarkautomations.com Please check my portfolio for my detail work. Experienced skills: 1. PCB designing with Eagle 2. AVR, Arduino, STM32, PIC 3. ESP8266, NodeMCU 4. Internet Of Things 5. GUI designing with VB .NET in Visual Studio for communication with devices 6. Android Apps for Embedded Devices 7. Protocols: UDP, TCP/IP, MODBUS RTU/IP, CAN, WIFI, Zigbee, LoRa, RF Wireless communication We would like to have the opportunity to work with you and assure the best quality solution. kurang
  • Rekrut vtlabs
    3.3
    1 ulasan $25 USD per jam
    I have an Hons degree in Electronic Engineering from NUST, and I started my Open Source then Free Lance work way before my Graduation, because I LOVE helping people. I also have 6 years experience developing Java Applications. My work is available on my Git hub account, User is vusivus. I also have 4 years experience...
    I have an Hons degree in Electronic Engineering from NUST, and I started my Open Source then Free Lance work way before my Graduation, because I LOVE helping people. I also have 6 years experience developing Java Applications. My work is available on my Git hub account, User is vusivus. I also have 4 years experience developing Embedded applications in C++, C and assembly. I have the following software development skills: 1. Basic Web development with HTML5, CSS3, Bootstrap and Javascript. 2. Server side web development using ASP.NET with MVC6, PHP 7, NodeJS and Java. 3. Desktop application development using Java or C# I also have the following embedded software development skills: 1. Microcontroller programming in C/C++ or assembly. I can program PIC, AVR, SAM, STM32, NRF and ESP microcontrollers. 2. Microprocessor programming in assembly and embedded linux. I can design Circuits and PCBs using the following software: 1. Altium Designer 2. Eagle Premium 3. Proteus 4. KiCAD kurang

Hai , berikut beberapa offline freelancer

Hai , berikut beberapa freelancer yang sesuai ""offline